Hi Peng, 2018-01-10 3:20 GMT-02:00 Peng Fan <peng....@nxp.com>: > This patchset is to add i.MX8M and i.MX8MQ-EVK support > > V5: > Drop wait_mask_set/clr_timeout and switch to use readl_poll_timeout in > the patchset. > > V4: > Regenerate patchset based on Tom's master tree. > In this patchset, https://patchwork.ozlabs.org/patch/855027/ > "arm: imx: Rework i.MX specific commands to be excluded from SPL" from > Tom is included to avoid merge conflicts because the i.mx8m change > also has some modification to bootaux and arch/arm/mach-imx/Makefile. > Because CONFIG_GPT_TIMER change, I did a small modification to apply > Tom's patch, no function change. > > Include ATF link in README. > > V3: > This patchset based on https://patchwork.ozlabs.org/patch/855027/ > "arm: imx: Rework i.MX specific commands to be excluded from SPL" from > Tom to avoid this patchset fail apply after Tom's patch merged. > > Previously "power: pmic/regulator allow dm be omited by SPL" broke other > boards, in V3 patchset, only touch pfuze100 related options. > > Sharing code about get mac from fuse between mx7/mx8m > Sharing code about bootaux between mx6/7/mx8m > Sharing code about cpu speed grade between mx7/mx8m > Sharing code about get boot device between mx7/mx8m > Sharding code about mmc env between mx7/mx8m > > Introduce wait_mask_set/clr_timeout to avoid deadloop in clock pll > configuration > > Correct authorship of fix building warning on fec arm64, patch 27/31. > > Switch to use structure for DDR Controller. For DDR PHY registers, > there are about more than 10 thousands registers, I could not convert > them with detailed register name, and the script is generated from IC team, > So I use regs[0xxxxx] arrays here fo easily converting between IC team > released script and uboot ddr phy cod. > > Improve REAMME file to include where to download firmware and imx-mkimage > and how to build > > Add review tags on the V2 patchset. > > Hope this patchset could catch up next release :) > > V2: > > patch 02/23: convert to structure, drop is_boot_from_usb and > disconnect_from_usb > patch 04/23: conver to use structure for the clock driver, removed the > CCM_xxx macros. Add static for local functons. > Add init_usdhc_clk, init_uart_clk and etc to not enable > them all at default. > patch 05/23: Add more commit msg for the sip part. > patch 08/23: Merge the spl boot device with i.MX7 > patch 12/23: Typo fix and return error fix from Heiko for the SoC related > part > patch 22/23: Use a weak function ddr_init. If patch 23/23 could not be > accepted at current stage, to make others still be could be > compiled. > > The patchset depends on > https://patchwork.ozlabs.org/patch/841934/ > https://patchwork.ozlabs.org/patch/841958/ > to be tested on real hardware. > > V1: > > patch: "power: pmic.h: include dm/ofnode.h" and > "power: pmic/regulator allow dm be omited by SPL" is previously reviewed > in mailist to not merged. If no issue, you may pick it up. > > The board support is a large patch because of the ddr related code. > If it is not good, please first review/pick-up other patches if they > are ok. > > > > Peng Fan (29): > imx: add i.MX8M into Kconfig > imx: mx8m: add register definition header file > imx: mx8m: add pin header file > imx: mx8m: add clock driver > imx: add sip function > imx: boot_mode: add USB_BOOT entry > imx: cpu: update cpu file to support i.MX8M > imx: spl: implement spl_boot_device for i.MX8M > imx: add i.MX8MQ SoC Revision and is_mx8m helper > imx: add pad settings bit definition for i.MX8M > imx: cpu: move speed/temp to common cpu > imx: cpu: add cpu speed/grade for i.MX8M > imx: refactor imx_get_mac_from_fuse > imx: cleanup bootaux > imx: bootaux: support i.MX8M > imx: mx7: move get_boot_device to cpu.c > imx: cpu: support get_boot_device for i.MX8M > imx: mx7: move mmc env code to mmc_env.c > imx: mx8m: add soc related settings and files > imx: makefile: compile files for i.MX8M > misc: ocotp: add i.MX8M support > mmc: fsl_esdhc: support i.MX8M > imx: lcdif: include i.MX8M > gpio: mxc: add i.MX8M support > net: fec: do not access reserved register for i.MX8M > imx: imx8mq: add dtsi file > power: pmic/regulator allow dm be omitted by SPL > imx: mx8m: add ddr controller memory map > imx: add i.MX8MQ EVK support > > Tom Rini (1): > arm: imx: Rework i.MX specific commands to be excluded from SPL > > Ye Li (1): > net: fec: fix build warnings for 64bits support >
I was able to run your patchset on my board. For the whole series: Tested-by: Diego Dorta <diego.do...@nxp.com> Thanks, Diego _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
