Hi Ryan, On 19 January 2018 at 06:21, Ryan Harkin <ryan.har...@linaro.org> wrote: > Hi Stefan, > > Thanks for looking so quickly. > > On 19 January 2018 at 12:23, Stefan Agner <stefan.ag...@toradex.com> wrote: >> >> Hi Ryan, >> >> >> On 19.01.2018 10:53, Ryan Harkin wrote: >> > Add DTE mode support via Kconfig on the MXC uart. >> >> Make use of the driver model, there DTE is supported already today: >> https://lists.denx.de/pipermail/u-boot/2016-July/259573.html > > > My change would be useful for other non-DM users of serial_mxc.c, of course. > Not just WaRP7. > > I don't have any objection to WaRP7 moving to DM, although that isn't my > call, but moving using the driver model is not a straight-forward change, is > it? WaRP7 today doesn't use it.
We are planning to require that board use CONFIG_BLK fairly soon, and that likely means conversion to device tree I don't think it makes sense to accept patches like this. If the board can be converted, then let's do it! > > Do you have an example of a board using this driver that switched using the > driver model? I'd like to see the scale of the changes needed. It probably requires: - Adding a DT (with u-boot,dm-pre-reloc as needed) - Checking that stdio-path is correct Regards, Simon _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
