> -----Original Message----- > From: Andreas Färber [mailto:afaer...@suse.de] > Sent: Saturday, January 20, 2018 14:19 > To: u-boot@lists.denx.de > Cc: Andreas Färber; Kostya Porotchkin; Stefan Roese; Igal Liberman > Subject: [PATCH] tools/mrvl_uart.sh: Tidy script output > > Fix a typo in help output (awailable -> available). > Tidy the grammar - not the board connects to a port, we do. > > While at it, be consistent in upper-casing the comments. > > Fixes: eee4835d22 ("tools: Add Marvell recovery image download script") > Cc: Konstantin Porotchkin <kos...@marvell.com> > Cc: Stefan Roese <s...@denx.de> > Cc: Igal Liberman <ig...@marvell.com> > Signed-off-by: Andreas Färber <afaer...@suse.de> > --- > tools/mrvl_uart.sh | 6 +++--- > 1 file changed, 3 insertions(+), 3 deletions(-) > > diff --git a/tools/mrvl_uart.sh b/tools/mrvl_uart.sh index > 500fa117eb..6824208902 100755 > --- a/tools/mrvl_uart.sh > +++ b/tools/mrvl_uart.sh > @@ -46,13 +46,13 @@ then > echo -e "\nMarvell recovery image downloader for Armada SoC > family." > echo -e "Command syntax:" > echo -e "\t$(basename $0) <port> <file> [2|4|8]" > - echo -e "\tport - serial port the target board connected to" > + echo -e "\tport - serial port the target board is connected to" > echo -e "\tfile - recovery boot image for target download" > echo -e "\t2|4|8 - times to increase the default serial port speed > by" > echo -e "For example - load the image over ttyUSB0 @ 460800 baud:" > echo -e "$(basename $0) /dev/ttyUSB0 /tmp/flash-image.bin 4\n" > echo -e "=====WARNING=====" > - echo -e "- The speed-up option is not awailable in SoC families > prior to A8K+" > + echo -e "- The speed-up option is not available in SoC families > prior to A8K+" > echo -e "- This utility is not compatible with Armada 37xx SoC > family\n" > fi > > @@ -111,7 +111,7 @@ stty -F $port raw ignbrk time 5 $fast_baudrate sx - > vv $file > $port < $port > #sx-at91 $port $file > > -# return the port to the default speed > +# Return the port to the default speed > stty -F $port raw ignbrk time 5 $default_baudrate > > # Optional - fire up Minicom > -- > 2.13.6 [Konstantin Porotchkin] Reviewed-by: Konstantin Porotchkin <kos...@marvell.com>
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
