Hi JaeHoon,
On 17 January 2018 at 16:06, Jaehoon Chung <jh80.ch...@samsung.com> wrote:
> When power is off, clock is not disabling.
> Because it's passed to 1, mmc->clock should be set to f_min value.
> Some drivers can't initialize the eMMC/SD card with current status.
>
> This patch is to fix the disabling clock value to 0.
>
> Fixes: 2e7410d76ad1 ("mmc: disable the mmc clock during power off")
>
> Signed-off-by: Jaehoon Chung <jh80.ch...@samsung.com>
> ---
> drivers/mmc/mmc.c | 12 +++++++-----
> 1 file changed, 7 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
> index 53c819187e..311f51f237 100644
> --- a/drivers/mmc/mmc.c
> +++ b/drivers/mmc/mmc.c
> @@ -1501,11 +1501,13 @@ static int mmc_set_ios(struct mmc *mmc)
>
> int mmc_set_clock(struct mmc *mmc, uint clock, bool disable)
> {
> - if (clock > mmc->cfg->f_max)
> - clock = mmc->cfg->f_max;
> + if (!disable && clock != 0) {
> + if (clock > mmc->cfg->f_max)
> + clock = mmc->cfg->f_max;
>
> - if (clock < mmc->cfg->f_min)
> - clock = mmc->cfg->f_min;
> + if (clock < mmc->cfg->f_min)
> + clock = mmc->cfg->f_min;
> + }
>
> mmc->clock = clock;
> mmc->clk_disable = disable;
> @@ -2449,7 +2451,7 @@ static int mmc_power_on(struct mmc *mmc)
>
> static int mmc_power_off(struct mmc *mmc)
> {
> - mmc_set_clock(mmc, 1, true);
> + mmc_set_clock(mmc, 0, true);
> #if CONFIG_IS_ENABLED(DM_MMC) && CONFIG_IS_ENABLED(DM_REGULATOR)
> if (mmc->vmmc_supply) {
> int ret = regulator_set_enable(mmc->vmmc_supply, false);
> --
> 2.15.1
>
I have tested this patch on Odroid Xu4 on sd_card and eMMC module
and all seem to be working.
Tested-by: Anand Moon <linux.am...@gmail.com>
Best Regards
-Anand
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
