On 17.01.18 20:40, Simon Glass wrote: > Hi Alex, > > On 17 January 2018 at 00:54, Alexander Graf <ag...@suse.de> wrote: >> The serial devices on the raspberry pi are based on clocks we can't easily >> read and influence in U-Boot. However, the serial devices are always already >> properly set up when coming up, so all we need to do is leave them alone. >> >> The way to do that is to specify "skip-init" in device tree usually, but >> if we set CONFIG_OF_BOARD to get the device tree from the RPi firmware, >> that does not have skip-init properly set. >> >> So instead we just force it in board specific code. That way serial devices >> also work fine when skip-init is not passed explicitly in DT. >> >> Signed-off-by: Alexander Graf <ag...@suse.de> >> --- >> board/raspberrypi/rpi/rpi.c | 7 +++++++ >> drivers/serial/serial_bcm283x_mu.c | 2 +- >> drivers/serial/serial_pl01x.c | 2 +- >> 3 files changed, 9 insertions(+), 2 deletions(-) > > Would you mind converting these drivers to livetree before adding these > patches?
Uh, why? I don't quite see how it's related - and I'm not sure I'll make the rc1 cut-off even with just the pile I have right now :) Alex _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
