Hi, > -----Original Message----- > From: Jaehoon Chung [mailto:jh80.ch...@samsung.com] > Sent: Wednesday, January 17, 2018 4:16 PM > To: Siva Durga Prasad Paladugu <siva...@xilinx.com>; u- > b...@lists.denx.de > Cc: Siva Durga Prasad Paladugu <siva...@xilinx.com> > Subject: Re: [PATCH v2 1/7] mmc: sdhci: Add support for disabling clock > > Hi, > > On 01/04/2018 06:40 PM, Siva Durga Prasad Paladugu wrote: > > This patch adds support to disable clock if clk_disable was set and > > then enable or set clock if the clock was changed or clock was > > disabled when clock needs to be enabled. > > > > Signed-off-by: Siva Durga Prasad Paladugu <siva...@xilinx.com> > > --- > > drivers/mmc/sdhci.c | 7 ++++++- > > include/sdhci.h | 1 + > > 2 files changed, 7 insertions(+), 1 deletion(-) > > > > diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c index > > e2ddf5d..2bd721f 100644 > > --- a/drivers/mmc/sdhci.c > > +++ b/drivers/mmc/sdhci.c > > @@ -437,8 +437,13 @@ static int sdhci_set_ios(struct mmc *mmc) > > if (host->ops && host->ops->set_control_reg) > > host->ops->set_control_reg(host); > > > > - if (mmc->clock != host->clock) > > + if ((mmc->clock != host->clock || host->clk_disabled) && > > + !mmc->clk_disable) > > sdhci_set_clock(mmc, mmc->clock); > > + if (mmc->clk_disable) { > > + sdhci_set_clock(mmc, 0); > > + host->clk_disabled = true; > > + } > > host->clk_disabled is really needs? Where is clk_disabled set to false?
Oh yes, may not be needed, will check and remove. Thanks, Siva > > Best Regards, > Jaehoon Chung > > > > > /* Set bus width */ > > ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL); diff --git > > a/include/sdhci.h b/include/sdhci.h index 7e84012..4fc4140 100644 > > --- a/include/sdhci.h > > +++ b/include/sdhci.h > > @@ -259,6 +259,7 @@ struct sdhci_host { > > uint voltages; > > > > struct mmc_config cfg; > > + bool clk_disabled; > > }; > > > > #ifdef CONFIG_MMC_SDHCI_IO_ACCESSORS > > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot