On 13.1.2018 21:48, Ezequiel Garcia wrote: > NAND and QSPI devices are now supported, so mark > them as such. > > Cc: Michal Simek <michal.si...@xilinx.com> > Signed-off-by: Ezequiel Garcia <ezequ...@vanguardiasur.com.ar> > --- > doc/README.zynq | 7 +++---- > 1 file changed, 3 insertions(+), 4 deletions(-) > > diff --git a/doc/README.zynq b/doc/README.zynq > index b89c39edac18..451743f39eaa 100644 > --- a/doc/README.zynq > +++ b/doc/README.zynq > @@ -62,9 +62,10 @@ bootmode strings at runtime. > serial - drivers/serial/serial_zynq.c > net - drivers/net/zynq_gem.c > mmc - drivers/mmc/zynq_sdhci.c > - mmc - drivers/mmc/zynq_sdhci.c > - spi- drivers/spi/zynq_spi.c > + spi - drivers/spi/zynq_spi.c > + qspi - drivers/spi/zynq_qspi.c > i2c - drivers/i2c/zynq_i2c.c > + nand - drivers/mtd/nand/zynq_nand.c > - Done proper cleanups on board configurations > - Added basic FDT support for zynq boards > - d-cache support for zynq_gem.c > @@ -72,8 +73,6 @@ bootmode strings at runtime. > 6. TODO > > - Add zynq boards support - zc770_xm011 > -- Add zynq qspi controller driver > -- Add zynq nand controller driver > - Add FDT support on individual drivers > > [1] http://www.xilinx.com/products/boards-and-kits/EK-Z7-ZC702-G.htm >
Applied. Thanks, Michal _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
