On Thu, Jan 11, 2018 at 12:49 PM, David Lechner <da...@lechnology.com> wrote: > On 01/11/2018 12:36 PM, Adam Ford wrote: >> >> On Thu, Jan 11, 2018 at 12:11 PM, David Lechner <da...@lechnology.com> >> wrote: >>> >>> On 01/11/2018 10:06 AM, Adam Ford wrote: >>>> >>>> >>>> This converts the following to Kconfig: >>>> CONFIG_SYS_DV_CLKMODE >>>> CONFIG_SYS_DA850_PLL0_POSTDIV >>>> CONFIG_SYS_DA850_PLL0_PLLDIV1 >>>> CONFIG_SYS_DA850_PLL0_PLLDIV2 >>>> CONFIG_SYS_DA850_PLL0_PLLDIV3 >>>> CONFIG_SYS_DA850_PLL0_PLLDIV4 >>>> CONFIG_SYS_DA850_PLL0_PLLDIV5 >>>> CONFIG_SYS_DA850_PLL0_PLLDIV7 >>>> CONFIG_SYS_DA850_PLL1_POSTDIV >>>> CONFIG_SYS_DA850_PLL1_PLLDIV1 >>>> CONFIG_SYS_DA850_PLL1_PLLDIV2 >>>> CONFIG_SYS_DA850_PLL1_PLLDIV3 >>>> >>>> Signed-off-by: Adam Ford <aford...@gmail.com> >>>> ---
[snip] > > > Understood. If you would like to add a short description to these > options, you can just say that the value will be written directly > to the PLLDIVn register (or PLLM register). That should be good > enough. > I can do that. That makes sense, and it's at least a slight improvement from what we had before. > adam > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
