It is good to see this string to make sure that u-boot which runs on the board is the same which should run there.
Signed-off-by: Michal Simek <michal.si...@xilinx.com> --- configs/zynq_zc702_defconfig | 1 + configs/zynq_zc706_defconfig | 1 + configs/zynq_zc770_xm010_defconfig | 1 + configs/zynq_zc770_xm011_defconfig | 1 + configs/zynq_zc770_xm012_defconfig | 1 + configs/zynq_zc770_xm013_defconfig | 1 + 6 files changed, 6 insertions(+) diff --git a/configs/zynq_zc702_defconfig b/configs/zynq_zc702_defconfig index 0d0efc223dd4..1d097014f0d3 100644 --- a/configs/zynq_zc702_defconfig +++ b/configs/zynq_zc702_defconfig @@ -2,6 +2,7 @@ CONFIG_ARM=y CONFIG_SYS_CONFIG_NAME="zynq_zc70x" CONFIG_ARCH_ZYNQ=y CONFIG_SYS_TEXT_BASE=0x4000000 +CONFIG_IDENT_STRING=" Xilinx Zynq ZC702" CONFIG_SPL_STACK_R_ADDR=0x200000 CONFIG_DEFAULT_DEVICE_TREE="zynq-zc702" CONFIG_DEBUG_UART=y diff --git a/configs/zynq_zc706_defconfig b/configs/zynq_zc706_defconfig index 4b186c9fffc6..dbcb4de1d8af 100644 --- a/configs/zynq_zc706_defconfig +++ b/configs/zynq_zc706_defconfig @@ -2,6 +2,7 @@ CONFIG_ARM=y CONFIG_SYS_CONFIG_NAME="zynq_zc70x" CONFIG_ARCH_ZYNQ=y CONFIG_SYS_TEXT_BASE=0x4000000 +CONFIG_IDENT_STRING=" Xilinx Zynq ZC706" CONFIG_SPL_STACK_R_ADDR=0x200000 CONFIG_DEFAULT_DEVICE_TREE="zynq-zc706" CONFIG_DEBUG_UART=y diff --git a/configs/zynq_zc770_xm010_defconfig b/configs/zynq_zc770_xm010_defconfig index 2b8fb3c9214a..f38ce4f1ce10 100644 --- a/configs/zynq_zc770_xm010_defconfig +++ b/configs/zynq_zc770_xm010_defconfig @@ -1,6 +1,7 @@ CONFIG_ARM=y CONFIG_ARCH_ZYNQ=y CONFIG_SYS_TEXT_BASE=0x4000000 +CONFIG_IDENT_STRING=" Xilinx Zynq ZC770 XM010" CONFIG_SPL_STACK_R_ADDR=0x200000 CONFIG_DEFAULT_DEVICE_TREE="zynq-zc770-xm010" CONFIG_DEBUG_UART=y diff --git a/configs/zynq_zc770_xm011_defconfig b/configs/zynq_zc770_xm011_defconfig index 52ad66a38f61..d46238202ed2 100644 --- a/configs/zynq_zc770_xm011_defconfig +++ b/configs/zynq_zc770_xm011_defconfig @@ -1,6 +1,7 @@ CONFIG_ARM=y CONFIG_ARCH_ZYNQ=y CONFIG_SYS_TEXT_BASE=0x4000000 +CONFIG_IDENT_STRING=" Xilinx Zynq ZC770 XM011" CONFIG_SPL_STACK_R_ADDR=0x200000 # CONFIG_SPL_FAT_SUPPORT is not set CONFIG_DEFAULT_DEVICE_TREE="zynq-zc770-xm011" diff --git a/configs/zynq_zc770_xm012_defconfig b/configs/zynq_zc770_xm012_defconfig index a8338f5c2d82..38937800497f 100644 --- a/configs/zynq_zc770_xm012_defconfig +++ b/configs/zynq_zc770_xm012_defconfig @@ -1,6 +1,7 @@ CONFIG_ARM=y CONFIG_ARCH_ZYNQ=y CONFIG_SYS_TEXT_BASE=0x4000000 +CONFIG_IDENT_STRING=" Xilinx Zynq ZC770 XM012" CONFIG_SPL_STACK_R_ADDR=0x200000 # CONFIG_SPL_FAT_SUPPORT is not set CONFIG_DEFAULT_DEVICE_TREE="zynq-zc770-xm012" diff --git a/configs/zynq_zc770_xm013_defconfig b/configs/zynq_zc770_xm013_defconfig index 01e2cfe04fb2..6e9c957dddb3 100644 --- a/configs/zynq_zc770_xm013_defconfig +++ b/configs/zynq_zc770_xm013_defconfig @@ -1,6 +1,7 @@ CONFIG_ARM=y CONFIG_ARCH_ZYNQ=y CONFIG_SYS_TEXT_BASE=0x4000000 +CONFIG_IDENT_STRING=" Xilinx Zynq ZC770 XM013" CONFIG_SPL_STACK_R_ADDR=0x200000 # CONFIG_SPL_FAT_SUPPORT is not set CONFIG_DEFAULT_DEVICE_TREE="zynq-zc770-xm013" -- 1.9.1 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
