Re: [U-Boot] [PATCH] ARM: mvebu: correct reference for "ethernet1" on DB-88F6820-AMC

[Stefan Roese]

On 08.01.2018 04:17, Chris Packham wrote:

The DB-88F6820-AMC connects ethernet@34000 and ethernet@70000 which are
labeled as eth2 and eth0 in armada-38x.dts. The ethernet@30000 (eth1) is
not used on the AMC board.

This eliminates the following bootup message

   Device 'ethernet@70000': seq 0 is in use by 'ethernet@34000'

Signed-off-by: Chris Packham <judge.pack...@gmail.com>
---

  arch/arm/dts/armada-385-amc.dts | 2 +-
  1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/dts/armada-385-amc.dts b/arch/arm/dts/armada-385-amc.dts
index 5e1588d57438..d4d127fa024b 100644
--- a/arch/arm/dts/armada-385-amc.dts
+++ b/arch/arm/dts/armada-385-amc.dts
@@ -53,7 +53,7 @@

aliases {

                ethernet0 = &eth0;
-               ethernet1 = &eth1;
+               ethernet1 = &eth2;
                i2c0 = &i2c0;
                spi1 = &spi1;
        };

Applied to u-boot-marvell/master

Thanks,
Stefan
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot