>-----Original Message-----
>From: York Sun
>Sent: Tuesday, January 09, 2018 1:10 AM
>To: Bhaskar Upadhaya <bhaskar.upadh...@nxp.com>; u-boot@lists.denx.de
>Subject: Re: [PATCH v3 2/3] board: freescale: ls1012a: LS1012A-2G5RDB board
>support
>
>On 11/29/2017 09:13 PM, Bhaskar Upadhaya wrote:
>> LS1012A-2G5RDB belongs to LS1012A family with features
>> 2 2.5G SGMII PFE MAC, SATA, USB 2.0/3.0, WiFi DDR, eMMC, QuadSPI, UART
>>
>> Signed-off-by: Bhaskar Upadhaya <bhaskar.upadh...@nxp.com>
>> ---
>> changes for v3:
>> 1. remove pfe driver changes from this patch 2. remove PCIe, DSPI
>> from ls1012a2g5rdb_qspi_defconfig
>>
>
><snip>
>
>> diff --git a/board/freescale/ls1012ardb/ls1012ardb.c
>> b/board/freescale/ls1012ardb/ls1012ardb.c
>> index 41283db..9675335 100644
>> --- a/board/freescale/ls1012ardb/ls1012ardb.c
>> +++ b/board/freescale/ls1012ardb/ls1012ardb.c
>> @@ -28,6 +28,7 @@ DECLARE_GLOBAL_DATA_PTR;
>>
>> int checkboard(void)
>> {
>> +#ifdef CONFIG_TARGET_LS1012ARDB
>> u8 in1;
>>
>> puts("Board: LS1012ARDB ");
>> @@ -57,6 +58,9 @@ int checkboard(void)
>> puts(": bank2\n");
>> else
>> puts("unknown\n");
>> +#else
>> + puts("Board: LS1012A2G5RDB ");
>> +#endif
>>
>> return 0;
>> }
>> @@ -148,10 +152,12 @@ int esdhc_status_fixup(void *blob, const char
>*compat)
>> * 10 - eMMC Memory
>> * 11 - SPI
>> */
>> +#ifdef CONFIG_TARGET_LS1012ARDB
>> if (i2c_read(I2C_MUX_IO1_ADDR, 0, 1, &io, 1) < 0) {
>> printf("Error reading i2c boot information!\n");
>> return 0; /* Don't want to hang() on this error */
>> }
>> +#endif
>>
>> mux_sdhc2 = (io & 0x0c) >> 2;
>> /* Enable SDHC2 only when use SDIO wifi and eMMC */
>
>Bhaskar,
>
>Please double check changes to this file. I am seeing compiling errors related
>to
>I2C_MUX_IO_ADDR, I2C_MUX_IO_1, SW_REV_MASK, SW_REV_D for
>ls1012a2g5rdb_qspi on top of master branch.
>
>York
York,
This patch needs to be re spin because it modifies file "
board/freescale/ls1012ardb/eth.c " which is introduced by PFE patch set which
are still under discussion.
So will send another rev of this patch which will remove the file
"board/freescale/ls1012ardb/eth.c "
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
