Hi Bryan, 2018-01-08 15:36 GMT-02:00 Bryan O'Donoghue <bryan.odonog...@linaro.org>: > v5: > - Drop dcache disable across HAB call. > We can't replicate this error on the current codebase and the available > images. We'll have to wait for the error to crop up again before pushing > that patch any further. > > v4: > - No change mixed extra patches @ v3 unnoticed with previous > git-send > > v3: > - Only call into ROM if headers are verified. - Bryan > > - Print HAB event log if and only if a call was made to HAB > and a meaningful status code has been obtained. - Breno > > v2: > - Fix compilation warnings and errors in SPL highlighted by > Breno Matheus Lima > > - Add CC: Breno Matheus Lima <brenomath...@gmail.com> to all patches > > v1: > This patchset updates the i.MX HAB layer in u-boot to fix a list of > identified issues and then to add and extend existing functionality. > > The first block of patches 0001-0006 deal with fixing existing code, > > - Fixes indentation > - Fixes the treatment of input parameters to hab_auth_image. > > The second block of patches 0007-0013 are about tidying up the HAB code > > - Remove reliance on hard-coding to specific offsets > - IVT header drives locating CSF > - Continue to support existing boards > > Patches 0014 onwards extend out the HAB functionality. > > - hab_rvt_check_target is a recommended check in the NXP documents to > perform prior to hab_rvt_authenticate_image > - hab_rvt_failsafe is a useful function to set the board into BootROM > USB recovery mode. > > > Bryan O'Donoghue (24): > arm: imx: hab: Make authenticate_image return int > arm: imx: hab: Fix authenticate_image result code > arm: imx: hab: Optimise flow of authenticate_image on is_enabled fail > arm: imx: hab: Optimise flow of authenticate_image on hab_entry fail > arm: imx: hab: Move IVT_SIZE to hab.h > arm: imx: hab: Move CSF_PAD_SIZE to hab.h > arm: imx: hab: Fix authenticate_image input parameters > arm: imx: hab: Add IVT header definitions > arm: imx: hab: Add IVT header verification > arm: imx: hab: Verify IVT self matches calculated address > arm: imx: hab: Only call ROM once headers are verified > arm: imx: hab: Print CSF based on IVT descriptor > arm: imx: hab: Print additional IVT elements during debug > arm: imx: hab: Define rvt_check_target() > arm: imx: hab: Implement hab_rvt_check_target > arm: imx: hab: Add a hab_rvt_check_target to image auth > arm: imx: hab: Print HAB event log only after calling ROM > arm: imx: hab: Make internal functions and data static > arm: imx: hab: Prefix authenticate_image with imx_hab > arm: imx: hab: Rename is_hab_enabled imx_hab_is_enabled > arm: imx: hab: Make imx_hab_is_enabled global > arm: imx: hab: Define rvt_failsafe() > arm: imx: hab: Implement hab_rvt_failsafe > arm: imx: hab: Add hab_failsafe console command
For the entire series: Tested-by: Breno Lima <breno.l...@nxp.com> Thanks, Breno Lima _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
