Hi, On 01/08/2018 03:57 PM, Anand Moon wrote: > Hi Jaehoon,
This topic is on u-boot side. so Removed the linux-samsung-soc mailing. [..snip..] >>> How can we invoke and verify the s2mps11 init function during board >>> initialization ? >> >> When i have checked the above values, those are the reset value at each >> registers. >> but some registers are different with reset values. >> >> do you want to change the pmic register value at init time? > [snip] > > What I have debug at my end pmci is not getting invoke or initialize via > u-boot. > Yes default value for all the control registers would be fine. > > I was looking into some missing feature like. > s2mps11 regulator initialization via dts in u-boot. > s2mps11_pmic > .probe = s2mps11_probe > .bind = s2mps11_bind It needs to implement the regulator driver. I will send the patch for s2mps11 regulator driver within this week. Then i think that it will be set to values from device-tree. > > Can we enable CONFIG_SPL_BUILD for Odroid platform. > much of the core initialization is blocked under this flag. > Is their any plan to make this feature working. Lukasz has already mentioned.. > > Best Regards > -Anand > > > _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
