Changes vs V1: - Add two patches from Chen-Yu to enable host mode - split USB0 base address change to separate patch - revise OTG clock enabling patch
Chen-Yu Tsai (2): sunxi: Fix USB PHY index for H3/H5/A64 sunxi: usb_phy: setup USB PHY passby for USB0 on H3/H5/A64 Jun Nie (6): sunxi: h3: Sync OTG and HCI nodes from Linux DT sunxi: musb: Add fifo config for H3 sunxi: musb: Hack dynamic fifo support for H3 OTG sunxi: musb: Enable OTG device clock for H3 sunxi: usb_phy: Clear PHYCTL register before writing sunxi: H3: set different otg base address per mode arch/arm/dts/sun8i-h3.dtsi | 32 ++++++++++++++++++++++ arch/arm/include/asm/arch-sunxi/clock_sun6i.h | 31 +++++++++++----------- arch/arm/include/asm/arch-sunxi/cpu_sun4i.h | 4 +++ arch/arm/mach-sunxi/usb_phy.c | 15 +++++++++-- drivers/usb/host/ehci-sunxi.c | 9 ++++++- drivers/usb/host/ohci-sunxi.c | 9 ++++++- drivers/usb/musb-new/musb_regs.h | 3 ++- drivers/usb/musb-new/sunxi.c | 38 ++++++++++++++++++++++++++- 8 files changed, 119 insertions(+), 22 deletions(-) -- 1.9.1 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
