This patch series is meant to add SD3.0 support for ZynqMP platform. The first five patches in the series mostly setting up things in sdhci layer to support SD3.0 , the sixth patch is to add SD3.0 support for ZynqMP platform and the last patch is to enable this support for ZynqMP zcu102 rev1.0 eval board.
Repo: u-boot-mmc.git Branch: hs200-working Siva Durga Prasad Paladugu (7): mmc: sdhci: Add support for disabling clock mmc: sdhci: Handle execute tuning command in sdhci_send_command sdhci: Add new sdhci ops for platform specific tuning and delays mmc: sdhci: Invoke platform specific tuning and delay routines mmc : sdhci: Read capabilities register1 and update host caps mmc: zynq_sdhci: Add support for SD3.0 zynqmp: zcu102: Enable UHS support for ZCU102 Rev1.0 board board/xilinx/zynqmp/Makefile | 2 + board/xilinx/zynqmp/tap_delays.c | 230 ++++++++++++++++++++++++++ configs/xilinx_zynqmp_zcu102_rev1_0_defconfig | 2 + drivers/mmc/sdhci.c | 67 +++++++- drivers/mmc/zynq_sdhci.c | 230 +++++++++++++++++++++++++- include/sdhci.h | 9 + 6 files changed, 530 insertions(+), 10 deletions(-) create mode 100644 board/xilinx/zynqmp/tap_delays.c -- 2.7.4 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
