Hi Stefano,
--- On Wed, 1/13/10, Stefano Babic <sba...@denx.de> wrote:
> From: Stefano Babic <sba...@denx.de>
> Subject: [U-Boot] [PATCH V2 1/9] mkimage: Add Freescale imx Boot Image
> support (imximage)
> To: u-boot@lists.denx.de
> Date: Wednesday, January 13, 2010, 7:50 AM
> This patch adds support for
> "imximage" (MX Boot Image)
> to the mkimage utility. The imximage is used on the
> Freescales's
> MX.51 processors.
I like the way you handle the internal boot on the MX51. Very smart approach ;-)
MX25 and MX35 can also benefit from the imximage utility that you proposed, so
please change the description to make it more generic, such as:
"The imximage can be used on MX25, MX35 and MX51 processors for handling
internal boot mode."
....
> +---------------------------------------------
> +Imximage Boot Image generation using mkimage
> +---------------------------------------------
> +
> +This document describes how to set up a U-Boot image
> +that can be booted by the Freescale i.MX51 processor.
You could write: "... that can be booted by Freescale MX25, MX35 and MX51
processors via internal boot mode"
...
> +#define MAX_HW_CFG_SIZE 60 /* Max number
> of registers imx.51 can set */
MX25, MX35, MX51 can set
...
> + /* Init Freescale imx.51 Boot image
> generation/list support */
MX25, MX35 and MX51 Boot image ...
Regards,
Fabio Estevam
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
