On 02/01/2018 01:51, Fabio Estevam wrote:
> From: Fabio Estevam <fabio.este...@nxp.com>
>
> i.MX6ULL also does not have a MMDC_P1_BASE_ADDR, so do not try to
> access it.
>
> Signed-off-by: Fabio Estevam <fabio.este...@nxp.com>
> ---
> arch/arm/mach-imx/mx6/ddr.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/mach-imx/mx6/ddr.c b/arch/arm/mach-imx/mx6/ddr.c
> index 52a9a25..39dbd2f 100644
> --- a/arch/arm/mach-imx/mx6/ddr.c
> +++ b/arch/arm/mach-imx/mx6/ddr.c
> @@ -908,7 +908,7 @@ void mx6sdl_dram_iocfg(unsigned width,
> #define MR(val, ba, cmd, cs1) \
> ((val << 16) | (1 << 15) | (cmd << 4) | (cs1 << 3) | ba)
> #define MMDC1(entry, value) do { \
> - if (!is_mx6sx() && !is_mx6ul() && !is_mx6sl()) \
> + if (!is_mx6sx() && !is_mx6ul() && !is_mx6ull() && !is_mx6sl()) \
> mmdc1->entry = value; \
> } while (0)
>
> @@ -1215,7 +1215,7 @@ void mx6_ddr3_cfg(const struct mx6_ddr_sysinfo *sysinfo,
> u16 mem_speed = ddr3_cfg->mem_speed;
>
> mmdc0 = (struct mmdc_p_regs *)MMDC_P0_BASE_ADDR;
> - if (!is_mx6sx() && !is_mx6ul() && !is_mx6sl())
> + if (!is_mx6sx() && !is_mx6ul() && !is_mx6ull() && !is_mx6sl())
> mmdc1 = (struct mmdc_p_regs *)MMDC_P1_BASE_ADDR;
>
> /* Limit mem_speed for MX6D/MX6Q */
>
Reviewed-by: Stefano Babic <ssba...@denx.de>
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de
=====================================================================
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
