On 12/26/2017 11:47 AM, Jagan Teki wrote:
On Fri, Dec 22, 2017 at 3:30 PM, Stefan Mavrodiev <ste...@olimex.com> wrote:Driver testing is done with A20-OLinuXino-Lime2. Testing requirements are: - Exposing spi0 alternative pins in the dts file - Add alias node, enabling driver probing - Enable spi flash related options in the defconfig fileThe testing log is: U-Boot SPL 2018.01-rc2-00023-gfa13cb3-dirty (Dec 22 2017 - 11:39:48) DRAM: 1024 MiB CPU: 912000000Hz, AXI/AHB/APB: 3/2/2 Trying to boot from sunxi SPI U-Boot 2018.01-rc2-00023-gfa13cb3-dirty (Dec 22 2017 - 11:39:48 +0200) Allwinner Technology CPU: Allwinner A20 (SUN7I) Model: Olimex A20-OLinuXino-LIME2Lime2 doen't have in-built spi-nor is it?
We have some prototypes with this option.
I2C: ready DRAM: 1 GiB MMC: SUNXI SD/MMC: 0 MMC: no card present mmc_init: -123, time 1 *** Warning - MMC init failed, using default environmentyou lost the env? since it's spi-nor better to use flash env.
What's the point since this is only test case?
In: serial Out: serial Err: serial Allwinner mUSB OTG (Peripheral) SCSI: SATA link 0 timeout. AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode flags: ncq stag pm led clo only pmp pio slum part ccc apst Net: No ethernet found. starting USB... USB0: USB EHCI 1.00 USB1: USB OHCI 1.0 USB2: USB EHCI 1.00 USB3: USB OHCI 1.0 scanning bus 0 for devices... 1 USB Device(s) found scanning bus 2 for devices... 1 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found Hit any key to stop autoboot: 0 => sspi => sf probe SF: Detected w25q128bv with page size 256 Bytes, erase size 4 KiB, total 16 MiBtry to use erase/write and read commands to verify
# Erase one sector
=> sf erase 0x1000 0x100
SF: 256 bytes @ 0x1000 Erased: ERROR
=> sf erase 0x1000 0x1000
SF: 4096 bytes @ 0x1000 Erased: OK
# Get some random data
=> md.b 0x50000000 0x100
50000000: d6 4d d0 7e 93 d8 0f 48 1b ef 7f 7e be 4e a8 5d .M.~...H...~.N.]
50000010: fd 9f e5 7f 2f 7b 5b 19 ed de d8 58 99 7a 24 da ..../{[....X.z$.
50000020: ef dd 9c 45 d7 97 ab 4f e7 fb ee 61 bc de 6a 1a ...E...O...a..j.
50000030: 9a 9f f4 3a be 4b 2f f3 ce 77 87 7e 07 23 af ff ...:.K/..w.~.#..
50000040: e5 e5 c0 fa 65 e2 78 9b 16 38 42 52 e5 6c 52 0d ....e.x..8BR.lR.
50000050: f5 ff da 94 7f 98 96 d7 f0 9d 66 ae 9b b9 a2 cd ..........f.....
50000060: 0b dd f1 c9 1d 3b fe 5b cf ef d6 ce 8b c5 fd 56 .....;.[.......V
50000070: e2 52 eb 78 d4 f1 bf 57 56 6a 57 58 52 f1 0e 9d .R.x...WVjWXR...
50000080: df be f8 19 bf cf d7 ac 4b 3e 86 21 3f c3 fe 3e ........K>.!?..>
50000090: ea 27 52 ca 1f 79 bd 7b ef bf 96 c9 9d f6 81 d3 .'R..y.{........
500000a0: cc 2e 8b c8 34 7f c5 2f 29 19 a8 dc 54 7a 07 1d ....4../)...Tz..
500000b0: f4 e6 db ed 38 03 59 bb 31 ee b3 dd 5c e6 be 58 ....8.Y.1...\..X
500000c0: a6 7c 87 61 84 47 e0 b1 a1 fc 6e d3 d5 93 bf 8a .|.a.G....n.....
500000d0: 5d a3 be 4b cf 07 1d 92 ff 36 f9 46 fb 5a cb 8f ]..K.....6.F.Z..
500000e0: f9 27 7a b8 7b 07 2e 22 a1 ee 56 bc a7 de 57 6a .'z.{.."..V...Wj
500000f0: da d4 7d 7f ee db 7a e2 bc 5c 44 64 b7 fc ea 3e ..}...z..\Dd...
# Write one page to spi-nor
=> sf write 0x50000000 0x1000 0x100
device 0 offset 0x1000, size 0x100
SF: 256 bytes @ 0x1000 Written: OK
# Readback data
=> sf read 0x51000000 0x1000 0x100
device 0 offset 0x1000, size 0x100
SF: 256 bytes @ 0x1000 Read: OK
# Compare data
=> cmp.b 0x50000000 0x51000000 0x100
Total of 256 byte(s) were the same
=> sf test 0 100000 SPI flash test: 0 erase: 11407 ticks, 89 KiB/s 0.712 Mbps 1 check: 8881 ticks, 115 KiB/s 0.920 Mbps 2 write: 10824 ticks, 94 KiB/s 0.752 Mbps 3 read: 8872 ticks, 115 KiB/s 0.920 Mbps Test passed 0 erase: 11407 ticks, 89 KiB/s 0.712 Mbps 1 check: 8881 ticks, 115 KiB/s 0.920 Mbps 2 write: 10824 ticks, 94 KiB/s 0.752 Mbps 3 read: 8872 ticks, 115 KiB/s 0.920 Mbps => Signed-off-by: Stefan Mavrodiev <ste...@olimex.com> --- arch/arm/dts/sun7i-a20-olinuxino-lime2.dts | 21 +++++++++++++++++++++ configs/A20-OLinuXino-Lime2_defconfig | 8 ++++++++ 2 files changed, 29 insertions(+) diff --git a/arch/arm/dts/sun7i-a20-olinuxino-lime2.dts b/arch/arm/dts/sun7i-a20-olinuxino-lime2.dts index d5c796c..3c708da 100644 --- a/arch/arm/dts/sun7i-a20-olinuxino-lime2.dts +++ b/arch/arm/dts/sun7i-a20-olinuxino-lime2.dts @@ -54,6 +54,7 @@ aliases { serial0 = &uart0; + spi0 = &spi0; }; chosen { @@ -215,6 +216,20 @@ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; + spi0_pins_b: spi0@1 { + allwinner,pins = "PC0", "PC1", "PC2"; + allwinner,function = "spi0"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + spi0_cs0_pins_b: spi0_cs0@1 { + allwinner,pins = "PC23"; + allwinner,function = "spi0"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + usb0_id_detect_pin: usb0_id_detect_pin@0 { allwinner,pins = "PH4"; allwinner,function = "gpio_in"; @@ -257,6 +272,12 @@ status = "okay"; }; +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins_b>, <&spi0_cs0_pins_b>; + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; diff --git a/configs/A20-OLinuXino-Lime2_defconfig b/configs/A20-OLinuXino-Lime2_defconfig index 1edc844..c499e3d 100644 --- a/configs/A20-OLinuXino-Lime2_defconfig +++ b/configs/A20-OLinuXino-Lime2_defconfig @@ -30,3 +30,11 @@ CONFIG_SCSI=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_MUSB_GADGET=y CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y +CONFIG_CMD_SF=y +CONFIG_CMD_SF_TEST=yOk, but not useful to include in config's+CONFIG_CMD_SPI=ythis command is not needed, since the current usage on your board as spi-nor flash
Regards, Stefan Mavrodiev _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
