On Thu, Dec 28, 2017 at 10:37:18AM -0500, Tom Rini wrote:
> On Thu, Dec 28, 2017 at 01:25:43AM -0600, Derald D. Woods wrote:
>
> > This commit keeps the 'fdtaddr' as provided by DEFAULT_LINUX_BOOT_ENV.
> >
> > Signed-off-by: Derald D. Woods <woods.techni...@gmail.com>
> > ---
> > include/configs/omap3_evm.h | 1 +
> > 1 file changed, 1 insertion(+)
> >
> > diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h
> > index 629d60b961..d95ccdf035 100644
> > --- a/include/configs/omap3_evm.h
> > +++ b/include/configs/omap3_evm.h
> > @@ -127,6 +127,7 @@
> > "fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \
> > "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
> > "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
> > + "fdt_high=0xffffffff\0" \
> > "bootenv=uEnv.txt\0" \
> > "optargs=\0" \
> > "mmcdev=0\0" \
>
> What's the problem this solves, and how much memory is on the system in
> question? bootm_size should be ensuring we never relocate it outside of
> the first 256MB of memory. Thanks!
>
The logic within "common/image-fdt.c" lead me down this path. The
addition of this fairly common environment variable allowed my
OMAP34XX board to boot the kernel without an appended devicetree.
When I use the variable to trigger 'disable_relocation', as the code
indicates, the kernel boot behavior is what I expect. I spent a few
hours following the code path to a single line edition that works.
Without 'fdt_high'
==================
U-Boot SPL 2018.01-rc2-00028-gaf9da945cd-dirty (Dec 28 2017 - 11:16:52)
Trying to boot from MMC1
reading u-boot.img
reading u-boot.img
U-Boot 2018.01-rc2-00028-gaf9da945cd-dirty (Dec 28 2017 - 11:16:52 -0600)
OMAP3530-GP ES3.1, CPU-OPP2, L3-165MHz, Max CPU Clock 720 MHz
Model: TI OMAP35XX EVM (TMDSEVM3530)
OMAP3 EVM board + LPDDR/NAND
I2C: ready
DRAM: 256 MiB
NAND: 256 MiB
MMC: OMAP SD/MMC: 0
Read back SMSC id 0x92200000
OMAP die ID: 265a002400000000040365fa1801b01f
Net: smc911x-0
starting USB...
USB0: USB EHCI 1.00
scanning bus 0 for devices... 1 USB Device(s) found
Hit any key to stop autoboot: 0
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
switch to partitions #0, OK
mmc0 is current device
** Unable to read file uEnv.txt **
reading zImage
4637344 bytes read in 407 ms (10.9 MiB/s)
reading omap3-evm.dtb
62832 bytes read in 10 ms (6 MiB/s)
Booting zImage from mmc ...
* fdt: cmdline image address = 0x88000000
## Checking for 'FDT'/'FDT Image' at 88000000
* fdt: raw FDT blob
## Flattened Device Tree blob at 88000000
Booting using the fdt blob at 0x88000000
of_flat_tree at 0x88000000 size 0x0000f570
## device tree at 88000000 ... 8800f56f (len=75120 [0x12570])
Loading Device Tree to 8ffed000, end 8ffff56f ... OK
Starting kernel ...
[HANG]
Make note of the "of_flat_tree" and "Loading Device Tree" lines.
With 'fdt_high=0xffffffff'
==========================
U-Boot SPL 2018.01-rc2-00028-gaf9da945cd-dirty (Dec 28 2017 - 11:24:25)
Trying to boot from MMC1
reading u-boot.img
reading u-boot.img
U-Boot 2018.01-rc2-00028-gaf9da945cd-dirty (Dec 28 2017 - 11:24:25 -0600)
OMAP3530-GP ES3.1, CPU-OPP2, L3-165MHz, Max CPU Clock 720 MHz
Model: TI OMAP35XX EVM (TMDSEVM3530)
OMAP3 EVM board + LPDDR/NAND
I2C: ready
DRAM: 256 MiB
NAND: 256 MiB
MMC: OMAP SD/MMC: 0
Read back SMSC id 0x92200000
OMAP die ID: 265a002400000000040365fa1801b01f
Net: smc911x-0
starting USB...
USB0: USB EHCI 1.00
scanning bus 0 for devices... 1 USB Device(s) found
Hit any key to stop autoboot: 0
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
switch to partitions #0, OK
mmc0 is current device
** Unable to read file uEnv.txt **
reading zImage
4637344 bytes read in 407 ms (10.9 MiB/s)
reading omap3-evm.dtb
62832 bytes read in 10 ms (6 MiB/s)
Booting zImage from mmc ...
* fdt: cmdline image address = 0x88000000
## Checking for 'FDT'/'FDT Image' at 88000000
* fdt: raw FDT blob
## Flattened Device Tree blob at 88000000
Booting using the fdt blob at 0x88000000
of_flat_tree at 0x88000000 size 0x0000f570
Using Device Tree in place at 88000000, end 8801256f
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.15.0-rc5-1-gdc7de7cf5f08 (ddwoods@ethiopia) (gcc
version 7.2.0 (crosstool-NG crosstool-ng-1.23.0-269-ge832b9b2 - Linux 4.14.y))
#17 PREEMPT Wed Dec 27 22:59:37 CST 2017
[ 0.000000] CPU: ARMv7 Processor [411fc083] revision 3 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing
instruction cache
[ 0.000000] OF: fdt: Machine model: TI OMAP35XX EVM (TMDSEVM3530)
[ 0.000000] Memory policy: Data cache writeback
[ 0.000000] cma: Reserved 16 MiB at 0x8e800000
[ 0.000000] CPU: All CPU(s) started in SVC mode.
[ 0.000000] OMAP3430/3530 ES3.1 (l2cache iva sgx neon isp)
[ 0.000000] random: fast init done
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64706
[ 0.000000] Kernel command line: console=ttyO0,115200n8
mtdparts=omap2-nand.0:512k(spl),1792k(u-boot),128k(dtb),128k(u-boot-env),6m(kernel),-(rootfs)
root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Memory: 218956K/261120K available (9216K kernel code, 742K
rwdata, 3004K rodata, 1024K init, 7808K bss, 25780K reserved, 16384K
cma-reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xd0000000 - 0xff800000 ( 760 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xcff00000 ( 255 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (10208 kB)
[ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (1024 kB)
[ 0.000000] .data : 0x(ptrval) - 0x(ptrval) ( 743 kB)
[ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) (7809 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] ftrace: allocating 29168 entries in 86 pages
[ 0.000000] Running RCU self tests
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU event tracing is enabled.
[ 0.000000] RCU lockdep checking is enabled.
[ 0.000000] Tasks RCU enabled.
[...]
[NORMAL BOOT]
The "of_flat_tree" and "Using Device Tree" lines have the same location
in this case.
Currently in U-Boot
===================
$ grep -RI -e "fdt_high=" include/configs/
include/configs/ls1012a_common.h: "fdt_high=0xffffffffffffffff\0"
\
include/configs/dh_imx6.h: "fdt_high=0xffffffff\0" \
include/configs/db-88f6820-gp.h: "fdt_high=0x10000000\0" \
include/configs/mx6qarm2.h: "fdt_high=0xffffffff\0" \
include/configs/ls2080a_common.h: "fdt_high=0xa0000000\0"
\
include/configs/tegra-common-post.h: "fdt_high=" FDT_HIGH "\0" \
include/configs/ls1012ardb.h: "fdt_high=0xffffffffffffffff\0" \
include/configs/el6x_common.h: "fdt_high=0xffffffff\0" \
include/configs/turris_omnia.h: "fdt_high=0x10000000\0" \
include/configs/ls1088ardb.h: "fdt_high=0xa0000000\0" \
include/configs/nitrogen6x.h: "fdt_high=0xffffffff\0" \
include/configs/s32v234evb.h: "fdt_high=0xffffffff\0" \
include/configs/gw_ventana.h: "fdt_high=0xffffffff\0" \
include/configs/zynq-common.h: "fdt_high=0x20000000\0" \
include/configs/omap3_cairo.h: "fdt_high=0x87000000\0" \
include/configs/mx53ppd.h: "fdt_high=0xffffffff\0" \
include/configs/rk322x_common.h: "fdt_high=0x7fffffff\0" \
include/configs/ls1021atwr.h: "fdt_high=0xffffffff\0" \
include/configs/ls1021atwr.h: "fdt_high=0xffffffff\0" \
include/configs/mx7dsabresd.h: "fdt_high=0xffffffff\0" \
include/configs/mx6slevk.h: "fdt_high=0xffffffff\0" \
include/configs/am335x_shc.h: "fdt_high=0xffffffff\0" \
include/configs/colibri_imx7.h: "fdt_high=0xffffffff\0" \
include/configs/ls1088a_common.h: "fdt_high=0xa0000000\0"
\
include/configs/mx6sxsabreauto.h: "fdt_high=0xffffffff\0" \
include/configs/apalis_imx6.h: "fdt_high=0xffffffff\0" \
include/configs/advantech_dms-ba16.h: "fdt_high=0xffffffff\0" \
include/configs/pfla02.h: "fdt_high=0xffffffff\0"
\
include/configs/bav335x.h:"fdt_high=0xffffffff\0" \
include/configs/pico-imx6ul.h: "fdt_high=0xffffffff\0" \
include/configs/rpi.h: "fdt_high=ffffffff\0" \
include/configs/xilinx_zynqmp.h: "fdt_high=10000000\0" \
include/configs/udoo.h: "fdt_high=0xffffffff\0" \
include/configs/thunderx_88xx.h:
"fdt_high=0x9fffffff\0"
include/configs/wandboard.h: "fdt_high=0xffffffff\0" \
include/configs/ls1043a_common.h: "fdt_high=0xffffffffffffffff\0"
\
include/configs/mx6cuboxi.h: "fdt_high=0xffffffff\0" \
include/configs/omap3_beagle.h: "fdt_high=0xffffffff\0" \
include/configs/ls1088aqds.h: "fdt_high=0xa0000000\0" \
include/configs/ls1088aqds.h: "fdt_high=0xa0000000\0" \
include/configs/ls1088aqds.h: "fdt_high=0xa0000000\0" \
include/configs/ls1088aqds.h: "fdt_high=0xa0000000\0" \
include/configs/rcar-gen3-common.h: "fdt_high=0xffffffffffffffff\0" \
include/configs/mx6sxsabresd.h: "fdt_high=0xffffffff\0" \
include/configs/mx6sabre_common.h: "fdt_high=0xffffffff\0" \
include/configs/theadorable.h: "fdt_high=0x10000000\0" \
include/configs/novena.h: "fdt_high=0xffffffff\0"
\
include/configs/ls1012afrdm.h: "fdt_high=0xffffffffffffffff\0" \
include/configs/mx6ul_14x14_evk.h: "fdt_high=0xffffffff\0" \
include/configs/controlcenterdc.h: "fdt_high=0x10000000\0"
\
include/configs/ls2080ardb.h: "fdt_high=0xa0000000\0" \
include/configs/colibri_imx6.h: "fdt_high=0xffffffff\0" \
include/configs/db-88f6820-amc.h: "fdt_high=0x10000000\0" \
include/configs/rk3288_common.h: "fdt_high=0x0fffffff\0" \
include/configs/tqma6.h: "fdt_high=0xffffffff\0"
\
include/configs/udoo_neo.h: "fdt_high=0xffffffff\0" \
include/configs/syzygy_hub.h: "fdt_high=0x20000000\0" \
include/configs/mccmon6.h: "fdt_high=0xffffffff\0" \
include/configs/mx6ullevk.h: "fdt_high=0xffffffff\0" \
include/configs/hikey.h:
"fdt_high=0xffffffffffffffff\0" \
include/configs/aristainetos-common.h: "fdt_high=0xffffffff\0" \
include/configs/ls2080aqds.h: "fdt_high=0xa0000000\0" \
include/configs/ls2080aqds.h: "fdt_high=0xa0000000\0" \
include/configs/ls2080aqds.h: "fdt_high=0xa0000000\0" \
include/configs/topic_miami.h: "fdt_high=0x20000000\0" \
include/configs/ge_bx50v3.h: "fdt_high=0xffffffff\0" \
include/configs/opos6uldev.h: "fdt_high=0xffffffff\0"
\
include/configs/cl-som-imx7.h: "fdt_high=0xffffffff\0" \
include/configs/ls1021aqds.h: "fdt_high=0xffffffff\0" \
include/configs/ls1021aqds.h: "fdt_high=0xffffffff\0" \
include/configs/liteboard.h: "fdt_high=0xffffffff\0" \
include/configs/display5.h: "fdt_high=0xffffffff\0" \
include/configs/ls1046a_common.h: "fdt_high=0xffffffffffffffff\0"
\
include/configs/rk3188_common.h: "fdt_high=0x6fffffff\0" \
include/configs/pico-imx7d.h: "fdt_high=0xffffffff\0" \
include/configs/warp.h: "fdt_high=0xffffffff\0" \
include/configs/dragonboard410c.h: "fdt_high=0xffffffffffffffff\0" \
include/configs/vexpress_aemv8a.h:
"fdt_high=0xffffffffffffffff\0" \
include/configs/vexpress_aemv8a.h:
"fdt_high=0xffffffffffffffff\0" \
include/configs/vexpress_aemv8a.h:
"fdt_high=0xffffffffffffffff\0" \
include/configs/rk3036_common.h: "fdt_high=0x7fffffff\0" \
include/configs/ls1021aiot.h:"fdt_high=0xffffffff\0"
include/configs/warp7.h: "fdt_high=0xffffffff\0" \
include/configs/mx53ard.h: "fdt_high=0xffffffff\0" \
include/configs/xpress.h: "fdt_high=0xffffffff\0" \
include/configs/qemu-arm.h: "fdt_high=0xffffffff\0" \
include/configs/stih410-b2260.h:
"fdt_high=0xffffffffffffffff\0" \
include/configs/mx6sllevk.h: "fdt_high=0xffffffff\0" \
include/configs/clearfog.h: "fdt_high=0x10000000\0" \
include/configs/mx7ulp_evk.h: "fdt_high=0xffffffff\0" \
include/configs/imx6-engicam.h: "fdt_high=0xffffffff\0" \
include/configs/pcm052.h: "fdt_high=0xffffffff\0" \
include/configs/titanium.h: "fdt_high=0xffffffff\0" \
include/configs/mx25pdk.h: "fdt_high=0xffffffff\0" \
If there is some other usable code path, I will gladly add/implement it.
Derald
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
