Add CONFIG_MTD_ZYNQ_QSPI kconfig entry
Signed-off-by: Jagan Teki <ja...@amarulasolutions.com>
---
drivers/mtd/spi-nor/Kconfig | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/drivers/mtd/spi-nor/Kconfig b/drivers/mtd/spi-nor/Kconfig
index 64d5553..4b2a5e8 100644
--- a/drivers/mtd/spi-nor/Kconfig
+++ b/drivers/mtd/spi-nor/Kconfig
@@ -46,6 +46,15 @@ config MTD_SPI_NOR_USE_4K_SECTORS
Please note that some tools/drivers/filesystems may not work with
4096 B erase size (e.g. UBIFS requires 15 KiB as a minimum).
+config MTD_ZYNQ_QSPI
+ bool "Zynq QSPI NOR controller driver"
+ depends on ARCH_ZYNQ
+ help
+ Enable the Zynq Quad-SPI (QSPI) driver. This driver can be
+ used to access the SPI NOR flash on platforms embedding this
+ Zynq QSPI IP core. This IP is used to connect the flash in
+ 4-bit qspi, 8-bit dual stacked and shared 4-bit dual parallel.
+
config SPI_NOR_MISC
bool "Miscellaneous SPI NOR flash's support"
help
--
2.7.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
