Dear Remy Bohmer,
In message <3efb10971001090201w17b02f49me80d823043833...@mail.gmail.com> you
wrote:
> The following changes since commit
> 6ca9da4d42aeb43df5ef29f7d0518009df583b2f:
> Wolfgang Denk (1):
> Merge branch 'master' of git://git.denx.de/u-boot-ppc4xx
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-usb.git master
>
> Ajay Kumar Gupta (4):
> DA830: Add pinmux for USB0_DRVVBUS
> DA8xx: Add GPIO register definitions
> DA8xx: Add MUSB host support
> DA830: Add usb config
>
> Bryan Wu (4):
> usb: musb: make fifo support configurable
> usb: musb: make multipoint optional
> usb: musb: change rxcsr register from write to read/modify/write
> usb: musb: add support for Blackfin MUSB
>
> Chris Zhang (3):
> Fix EHCI port reset.
> Add ppc440epx USB ehci support.
> Adds EHCI definitions to sequoia board configuration file.
>
> Mike Frysinger (1):
> usb: musb: make sure the register layout is packed
>
> Sanjeev Premi (1):
> omap3: fix compile warning
>
> board/davinci/da830evm/da830evm.c | 8 +
> drivers/usb/host/Makefile | 1 +
> drivers/usb/host/ehci-hcd.c | 3 +
> drivers/usb/host/ehci-ppc4xx.c | 48 +++++
> drivers/usb/musb/Makefile | 2 +
> drivers/usb/musb/blackfin_usb.c | 143 +++++++++++++++
> drivers/usb/musb/blackfin_usb.h | 99 ++++++++++
> drivers/usb/musb/da8xx.c | 139 ++++++++++++++
> drivers/usb/musb/da8xx.h | 103 +++++++++++
> drivers/usb/musb/musb_core.c | 18 ++-
> drivers/usb/musb/musb_core.h | 18 ++-
> drivers/usb/musb/musb_hcd.c | 26 +++-
> drivers/usb/musb/musb_hcd.h | 4 +-
> drivers/usb/musb/omap3.c | 3 +
> include/asm-arm/arch-davinci/gpio_defs.h | 14 ++
> include/asm-blackfin/mach-common/bits/usb.h | 264
> +++++++++++++++++++++++++++
> include/configs/da830evm.h | 38 ++++-
> include/configs/sequoia.h | 16 ++-
> include/usb.h | 3 +-
> 19 files changed, 935 insertions(+), 15 deletions(-)
> create mode 100644 drivers/usb/host/ehci-ppc4xx.c
> create mode 100644 drivers/usb/musb/blackfin_usb.c
> create mode 100644 drivers/usb/musb/blackfin_usb.h
> create mode 100644 drivers/usb/musb/da8xx.c
> create mode 100644 drivers/usb/musb/da8xx.h
> create mode 100644 include/asm-blackfin/mach-common/bits/usb.h
Applied, thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de
History tends to exaggerate.
-- Col. Green, "The Savage Curtain", stardate 5906.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
