SPL/TPL also need use sysreset for some feature like panic callback.
Signed-off-by: Kever Yang <kever.y...@rock-chips.com>
---
Changes in v2: None
drivers/sysreset/Kconfig | 18 ++++++++++++++++++
drivers/sysreset/Makefile | 2 +-
2 files changed, 19 insertions(+), 1 deletion(-)
diff --git a/drivers/sysreset/Kconfig b/drivers/sysreset/Kconfig
index a6d48e8..a61a7d3 100644
--- a/drivers/sysreset/Kconfig
+++ b/drivers/sysreset/Kconfig
@@ -13,6 +13,24 @@ config SYSRESET
to effect a reset. The uclass will try all available drivers when
reset_walk() is called.
+config SPL_SYSRESET
+ bool "Enable support for system reset drivers in SPL mode"
+ depends on SYSRESET && SPL_DM
+ help
+ Enable system reset drivers which can be used to reset the CPU or
+ board. Each driver can provide a reset method which will be called
+ to effect a reset. The uclass will try all available drivers when
+ reset_walk() is called.
+
+config TPL_SYSRESET
+ bool "Enable support for system reset drivers in TPL mode"
+ depends on SYSRESET && TPL_DM
+ help
+ Enable system reset drivers which can be used to reset the CPU or
+ board. Each driver can provide a reset method which will be called
+ to effect a reset. The uclass will try all available drivers when
+ reset_walk() is called.
+
if SYSRESET
config SYSRESET_PSCI
diff --git a/drivers/sysreset/Makefile b/drivers/sysreset/Makefile
index 2e9598e..00be747 100644
--- a/drivers/sysreset/Makefile
+++ b/drivers/sysreset/Makefile
@@ -4,7 +4,7 @@
# SPDX-License-Identifier: GPL-2.0+
#
-obj-$(CONFIG_SYSRESET) += sysreset-uclass.o
+obj-$(CONFIG_$(SPL_TPL_)SYSRESET) += sysreset-uclass.o
obj-$(CONFIG_SYSRESET_PSCI) += sysreset_psci.o
obj-$(CONFIG_SYSRESET_SYSCON) += sysreset_syscon.o
obj-$(CONFIG_SYSRESET_WATCHDOG) += sysreset_watchdog.o
--
1.9.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
