Hi JJ, On 12/01/2017 01:43 AM, Jean-Jacques Hiblot wrote: > This series applies on top of "[PATCH v2 00/26] mmc: Add support for HS200 > and UHS modes" > > It fixes a bug with old SD and MMC cards that support only the legacy mode. > This series also adresses the problem of increased code size that broke some > platform (openrd and omapl138_lcdk) by making more things optional. > > It also addresses other comments made on the mailing list: > * dump card and host capabilities in debug mode > * use 1-bit if the DTS property 'bus-width' is not present. > * recognize the "mmc-ddr-1_2v" and "mmc-hs200-1_2v" DTS properties > * convert mmc_of_parse to livetree >
Applied to u-boot-mmc. Sorry for late. Thanks! Best Regards, Jaehoon Chung > > Tested on DRA72 > > changes since v4: > * use pr_warn() and pr_error() instead of custom macro to output log messages > * add a new patch to lower the LOGLEVEL for the platform omapl138_lcdk > * Fix typo in patch 'mmc: make optional the support for eMMC hardware > partitioning' > > changes since v3: > * Make UHS support optional. Disabled by default > * Make HS200 support optional. Disabled by default > * Make eMMC Hardware Partitioning optional. Enabled by default > * Display most of the error messages only if MMC_VERBOSE is set (it's set by > default) > > changes since v2: > * use the device-oriented helpers like dev_read_u32_default() instead of using > the livetree API > * Dump the host and card capabilities only in when debug is enabled. Also dump > the capabilities when 'mmc info' is executed if the verbose option is > enabled > > changes since v1: > * convert mmc_of_parse to livetree > * squashed all changes to mmc_of_parse in a single patch > > Jean-Jacques Hiblot (11): > mmc: dump card and host capabilities if debug is enabled > dm: mmc: update mmc_of_parse() > mmc: Fixed a problem with old sd or mmc that do not support High speed > mmc: all hosts support 1-bit bus width and legacy timings > mmc: fix for old MMCs (below version 4) > mmc: don't use malloc_cache_aligned() > mmc: convert most of printf() to pr_err() and pr_warn() > mmc: make UHS and HS200 optional > mmc: make optional the support for eMMC hardware partitioning > configs: openrd: removed support for eMMC hardware partitioning > configs: omapl138_lcdk: decrease the loglevel to reduce the size of > the SPL > > cmd/mmc.c | 8 ++ > configs/omapl138_lcdk_defconfig | 1 + > configs/openrd_base_defconfig | 1 + > configs/openrd_client_defconfig | 1 + > configs/openrd_ultimate_defconfig | 1 + > drivers/mmc/Kconfig | 58 ++++++++++++-- > drivers/mmc/mmc-uclass.c | 40 ++++++---- > drivers/mmc/mmc.c | 162 > +++++++++++++++++++++++++++++--------- > include/mmc.h | 38 +++++++-- > 9 files changed, 246 insertions(+), 64 deletions(-) > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
