On Sat, Dec 9, 2017 at 4:59 PM, Florian Fainelli <f.faine...@gmail.com> wrote: > Hi all, > > This patch series adds support for the Broadcom BCM53xx switches, in > particular > BCM53125 which is found no the Lamobo R1 board. > > The driver is largely based on the DSA/b53 driver Linux driver and only > incorporates what is necessary to succesfully bring-up all ports (including > the > management port) for boot over the network: > > => dhcp > dw_adjust_link: Speed: 1000, full duplex > BOOTP broadcast 1 > DHCP client bound to address 192.168.0.11 (3 ms) > Using ethernet@01c50000 device > TFTP from server 192.168.0.1; our IP address is 192.168.0.11 > Filename 'sun7i-a20-lamobo-r1-kernel.bin'. > Load address: 0x42000000 > Loading: ################################################################# > ################################################################# > ################################ > 11.6 MiB/s > done > Bytes transferred = 2371552 (242fe0 hex) > => > > Joe there is one warning left which does not look legit to me since we now > have > a help paragraph describing the config symbol: > > WARNING: please write a paragraph that describes the config symbol fully > #34: FILE: drivers/net/phy/Kconfig:15: > +config B53_SWITCH > > and one CHECK left which I intentionally did not fix because it makes the > definitions of the bits less clear: > CHECK: Prefer using the BIT macro > #134: FILE: drivers/net/phy/b53.c:63: > +#define PORT_OVERRIDE_SPEED_100M (1 << PORT_OVERRIDE_SPEED_S)
Works for me. Cheers, -Joe > > Changes in v4: > - address most checkpatch.pl issues, couple remaining, one which looks bogus: > > > Changes in v3: > - dropped redundant phydev->priv assignment in b53_probe(), spotted by Joe > > Changes in v2: > > - collected Sefan's Reviewed-by and Joe's Acked-by tags > - use max() in drivers/net/designware.c as suggested by Joe > > Florian Fainelli (4): > net: phy: Add Broadcom BCM53xx switch driver > net: designware: Pad small packets > net: phy: b53: Add b53_reg read/write commands > configs: Update Lamobo_R1 with B53 switch options > > Florian Fainelli (4): > net: phy: Add Broadcom BCM53xx switch driver > net: designware: Pad small packets > net: phy: b53: Add b53_reg read/write commands > configs: Update Lamobo_R1 with B53 switch options > > configs/Lamobo_R1_defconfig | 3 + > drivers/net/designware.c | 5 + > drivers/net/phy/Kconfig | 17 + > drivers/net/phy/Makefile | 1 + > drivers/net/phy/b53.c | 768 > ++++++++++++++++++++++++++++++++++++++++++++ > drivers/net/phy/phy.c | 3 + > include/phy.h | 1 + > 7 files changed, 798 insertions(+) > create mode 100644 drivers/net/phy/b53.c > > -- > 2.14.1 > > _______________________________________________ > U-Boot mailing list > U-Boot@lists.denx.de > https://lists.denx.de/listinfo/u-boot _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
