On Fri, Dec 01, 2017 at 12:14:41AM +0530, Jagan Teki wrote: > Brava Keller is A64 based IoT device, which support > - Allwinner A64 Cortex-A53 > - AXP803 PMIC > - 1GB DDR3 RAM > - 8GB eMMC > - Mali-400MP2 GPU > - AP6330 Wifi/BLE > - Camera OV5640 > - USB Host and OTG > > Signed-off-by: Jagan Teki <ja...@amarulasolutions.com> > --- > Note: Need to test it on hardware
Obviously this will need to be tested before being merged.
> arch/arm/dts/Makefile | 1 +
> arch/arm/dts/sun50i-a64-brava-keller.dts | 107
> +++++++++++++++++++++++++++++++
> board/sunxi/MAINTAINERS | 5 ++
> configs/brava_keller_defconfig | 13 ++++
> 4 files changed, 126 insertions(+)
> create mode 100644 arch/arm/dts/sun50i-a64-brava-keller.dts
> create mode 100644 configs/brava_keller_defconfig
>
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> index cd540e9..b89e75a 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -342,6 +342,7 @@ dtb-$(CONFIG_MACH_SUN50I_H5) += \
> sun50i-h5-orangepi-zero-plus2.dtb
> dtb-$(CONFIG_MACH_SUN50I) += \
> sun50i-a64-bananapi-m64.dtb \
> + sun50i-a64-brava-keller.dtb \
> sun50i-a64-nanopi-a64.dtb \
> sun50i-a64-olinuxino.dtb \
> sun50i-a64-orangepi-win.dtb \
> diff --git a/arch/arm/dts/sun50i-a64-brava-keller.dts
> b/arch/arm/dts/sun50i-a64-brava-keller.dts
> new file mode 100644
> index 0000000..094eee0
> --- /dev/null
> +++ b/arch/arm/dts/sun50i-a64-brava-keller.dts
> @@ -0,0 +1,107 @@
> +/*
> + * Copyright (C) 2017 Jagan Teki <ja...@amarulasolutions.com>
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + * a) This library is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of the
> + * License, or (at your option) any later version.
> + *
> + * This library is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * Or, alternatively,
> + *
> + * b) Permission is hereby granted, free of charge, to any person
> + * obtaining a copy of this software and associated documentation
> + * files (the "Software"), to deal in the Software without
> + * restriction, including without limitation the rights to use,
> + * copy, modify, merge, publish, distribute, sublicense, and/or
> + * sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following
> + * conditions:
> + *
> + * The above copyright notice and this permission notice shall be
> + * included in all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +/dts-v1/;
> +
> +#include "sun50i-a64.dtsi"
> +
> +#include <dt-bindings/gpio/gpio.h>
> +
> +/ {
> + model = "Brava Keller";
> + compatible = "brava,brava-keller", "allwinner,sun50i-a64";
> +
> + aliases {
> + serial2 = &uart2;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +
> + reg_vcc3v3: vcc3v3 {
> + compatible = "regulator-fixed";
> + regulator-name = "vcc3v3";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +};
> +
> +&ehci0 {
> + status = "okay";
> +};
> +
> +&ehci1 {
> + status = "okay";
> +};
> +
> +&mmc2 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&mmc2_pins>;
> + vmmc-supply = <®_vcc3v3>;
> + bus-width = <8>;
> + non-removable;
> + cap-mmc-hw-reset;
> + status = "okay";
> +};
> +
> +&ohci0 {
> + status = "okay";
> +};
> +
> +&ohci1 {
> + status = "okay";
> +};
> +
> +&uart2 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&uart2_pins>;
> + status = "okay";
> +};
That doesn't really make much sense. You have a single uart, and the
fact that you used stdout-path seems to indicate that it's your
console. However, you're using ttyS0 in stdout-path, and yet an alias
that would call it ttyS2...
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
signature.asc
Description: PGP signature
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
