Dear Dipanjan, In message <CAEK-7JK-c5+krRCmQZ45J2Nf3HRQtxLb4hvm2sdcrBQ=ers...@mail.gmail.com> you wrote: > I have compiled an older version of u-boot for ARM versatilepb board and > booted in qemu as: qemu-system-arm -M versatilepb -m 128M -nographic > -kernel flash.bin > > It boots fine, basic commans like `printenv` works. However, issuing > `loads` makes the bootloader wait indefinitely. No keypress works. The > prompt comes back if the command aborted by pressing Ctrl+C. I am not sure > if it is u-boot or qemu is misbehaving. Any suggestion?
This is the correct, expected behaviour. "loads" starts an S-Revord download over the serial line, so U-Boot is waiting for and readind the input which it expects t be in SREC format. What did you think "loads" would do? Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de He'd been wrong, there _was_ a light at the end of the tunnel, and it was a flamethrower. - Terry Pratchett, _Mort_ _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
