[primary] Check MMC 0:1 for /extlinux/extlinux.conf and boot
[fallback 1] Check MMC 0:1 zImage and run mmcbootz
[fallback 2] Check MMC 0:1 uImage and run mmcboot
[fallback 3] Check NAND partitions and run nandboot
If 'extlinux.conf' is not found on MMC 0, the previous boot behavior is
followed.
Signed-off-by: Derald D. Woods <woods.techni...@gmail.com>
---
configs/omap3_evm_defconfig | 2 +-
include/configs/omap3_evm.h | 94 ++++++++++++++++++++++++++++++++-------------
2 files changed, 68 insertions(+), 28 deletions(-)
diff --git a/configs/omap3_evm_defconfig b/configs/omap3_evm_defconfig
index f67bcb1895..0c513664fe 100644
--- a/configs/omap3_evm_defconfig
+++ b/configs/omap3_evm_defconfig
@@ -6,8 +6,8 @@ CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_SYS_MPUCLK=720
CONFIG_TARGET_OMAP3_EVM=y
CONFIG_DISTRO_DEFAULTS=y
-# CONFIG_USE_BOOTCOMMAND is not set
CONFIG_BOOTDELAY=3
+CONFIG_USE_BOOTCOMMAND=y
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_DEFAULT_FDT_FILE="omap3-evm.dtb"
CONFIG_VERSION_VARIABLE=y
diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h
index df50325ab6..42f2153637 100644
--- a/include/configs/omap3_evm.h
+++ b/include/configs/omap3_evm.h
@@ -86,8 +86,49 @@
/* Environment */
#define CONFIG_PREBOOT "usb start"
+#if !defined(CONFIG_SPL_BUILD)
+
+#include <config_distro_defaults.h>
+
+#define MEM_LAYOUT_ENV_SETTINGS \
+ DEFAULT_LINUX_BOOT_ENV
+
+#if defined(CONFIG_NAND)
+#define BOOTENV_DEV_NAND(devtypeu, devtypel, instance) \
+ "bootcmd_" #devtypel #instance "=" \
+ "run nandboot\0"
+
+#define BOOTENV_DEV_NAME_NAND(devtypeu, devtypel, instance) \
+ #devtypel #instance " "
+#endif /* CONFIG_NAND */
+
+#define BOOTENV_DEV_UIMAGE_MMC(devtypeu, devtypel, instance) \
+ "bootcmd_" #devtypel #instance "=" \
+ "setenv mmcdev " #instance"; " \
+ "run mmcboot\0"
+
+#define BOOTENV_DEV_NAME_UIMAGE_MMC(devtypeu, devtypel, instance) \
+ #devtypel #instance " "
+
+#define BOOTENV_DEV_ZIMAGE_MMC(devtypeu, devtypel, instance) \
+ "bootcmd_" #devtypel #instance "=" \
+ "setenv mmcdev " #instance"; " \
+ "run mmcbootz\0"
+
+#define BOOTENV_DEV_NAME_ZIMAGE_MMC(devtypeu, devtypel, instance) \
+ #devtypel #instance " "
+
+#define BOOT_TARGET_DEVICES(func) \
+ func(MMC, mmc, 0) \
+ func(ZIMAGE_MMC, zimage_mmc, 0) \
+ func(UIMAGE_MMC, uimage_mmc, 0) \
+ func(NAND, nand, 0)
+
+#include <config_distro_bootcmd.h>
+
#define CONFIG_EXTRA_ENV_SETTINGS \
- DEFAULT_LINUX_BOOT_ENV \
+ MEM_LAYOUT_ENV_SETTINGS \
+ "fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \
"mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
"bootenv=uEnv.txt\0" \
@@ -107,40 +148,39 @@
"loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
"importbootenv=echo Importing environment from mmc ...; " \
"env import -t ${loadaddr} ${filesize}\0" \
- "bootscript=echo Running bootscript from mmc ...; " \
- "source ${loadaddr}\0" \
+ "mmcbootenv=" \
+ "mmc dev ${mmcdev}; " \
+ "if mmc rescan && run loadbootenv; then " \
+ "run importbootenv; " \
+ "if test -n $uenvcmd; then " \
+ "echo Running uenvcmd ...; " \
+ "run uenvcmd; " \
+ "fi; " \
+ "fi\0" \
"loaduimage=setenv bootfile uImage; " \
"fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
"loadzimage=setenv bootfile zImage; " \
"fatload mmc ${mmcdev} ${loadaddr} zImage\0" \
- "loaddtb=fatload mmc ${mmcdev} ${fdtaddr} " CONFIG_DEFAULT_FDT_FILE
"\0" \
- "mmcboot=echo Booting ${bootfile} from mmc ...; " \
- "run mmcargs; " \
- "bootm ${loadaddr} - ${fdtaddr}\0" \
- "mmcbootz=echo Booting ${bootfile} from mmc ...; " \
- "run mmcargs; " \
- "bootz ${loadaddr} - ${fdtaddr}\0" \
+ "loaddtb=fatload mmc ${mmcdev} ${fdtaddr} ${fdtfile}\0" \
+ "mmcboot=run mmcbootenv; " \
+ "if run loaduimage && run loaddtb; then " \
+ "echo Booting ${bootfile} from mmc ...; " \
+ "run mmcargs; " \
+ "bootm ${loadaddr} - ${fdtaddr}; " \
+ "fi\0" \
+ "mmcbootz=run mmcbootenv; " \
+ "if run loadzimage && run loaddtb; then " \
+ "echo Booting ${bootfile} from mmc ...; " \
+ "run mmcargs; " \
+ "bootz ${loadaddr} - ${fdtaddr};" \
+ "fi\0" \
"nandboot=echo Booting uImage from nand ...; " \
"run nandargs; " \
"nand read ${loadaddr} kernel; " \
"nand read ${fdtaddr} dtb; " \
- "bootm ${loadaddr} - ${fdtaddr}\0"
+ "bootm ${loadaddr} - ${fdtaddr}\0" \
+ BOOTENV
-#define CONFIG_BOOTCOMMAND \
- "mmc dev ${mmcdev}; if mmc rescan; then " \
- "if run loadbootenv; then " \
- "run importbootenv; " \
- "if test -n $uenvcmd; then " \
- "echo Running uenvcmd ...; " \
- "run uenvcmd; " \
- "fi; " \
- "else " \
- "if run loadzimage && run loaddtb; then " \
- "run mmcbootz; fi; " \
- "if run loaduimage && run loaddtb; then " \
- "run mmcboot; fi; " \
- "run nandboot; " \
- "fi; " \
- "else run nandboot; fi"
+#endif /* !CONFIG_SPL_BUILD */
#endif /* __CONFIG_H */
--
2.14.2
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
