Duane, On 28/11/17 10:07, Duane Leslie wrote: > Roger, > > I’m not clear on the correct way to report bugs in U-Boot, but the change you > signed off in > https://github.com/u-boot/u-boot/commit/f411b5cca48f0eee9443b85e7b75a46356bd2327 > disabled the setting of the `ethaddr` environment variable in the SPL Build > meaning that it is no longer possible to produce a version of the SPL capable > of performing and ethernet network boot.
You could just report on the u-boot mailing list, (now in cc). > > I’m not sure what the preferred solution is but I have modified my version so > that `ethaddr` is set to the `macid0` value as follows the ROM ethernet boot, > and I don’t know what the URNDIS ROM driver uses but I loaded `macid1` into > `usbnet_devaddr` as a placeholder. > > It’d be nice to have an official solution to this especially since it allows > remote device recovery of IoT products over ethernet (no host PC required). Could you please post your patch to the u-boot list. Then hopefully someone (Lokesh?) will suggest if anything better can be done. Thanks. > > Regards, > > Duane. -- cheers, -roger Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
