On 11/14/2017 05:41 AM, Chris Brandt wrote:
> Since RZ/A1 (R7S72100) does not support HS mode, remove it from the
> host caps.
Doesn't HS mode? Then it's only supported the legacy mode?
>
> Signed-off-by: Chris Brandt <chris.bra...@renesas.com>
> ---
> drivers/mmc/sh_mmcif.c | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/drivers/mmc/sh_mmcif.c b/drivers/mmc/sh_mmcif.c
> index 1ff59f06d5..4b62795044 100644
> --- a/drivers/mmc/sh_mmcif.c
> +++ b/drivers/mmc/sh_mmcif.c
> @@ -576,8 +576,12 @@ static const struct mmc_ops sh_mmcif_ops = {
> static struct mmc_config sh_mmcif_cfg = {
> .name = DRIVER_NAME,
> .ops = &sh_mmcif_ops,
> +#if defined(CONFIG_R7S72100)
> + .host_caps = MMC_MODE_4BIT | MMC_MODE_8BIT,
> +#else
> .host_caps = MMC_MODE_HS | MMC_MODE_HS_52MHz | MMC_MODE_4BIT |
> MMC_MODE_8BIT,
> +#endif
> .voltages = MMC_VDD_32_33 | MMC_VDD_33_34,
> .b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT,
> };
>
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
