On 21 November 2017 at 05:00, Michal Simek <michal.si...@xilinx.com> wrote: > The patch is adding external pmufw "Platform Management Unit firmware" > to boot.bin image. Boot.bin is a Xilinx format which bootrom is capable > to read and boot the system. pmufw is copied to the header data section > follows by u-boot-spl.bin. pmufw is consumed by PMU unit (Microblaze) > and SPL runs on a53-0. > > This is generated command line when PMUFW_INIT_FILE is setup. > > ./tools/mkimage -T zynqmpimage -R ./"" -n > ./"board/xilinx/zynqmp/pmufw.bin" -d spl/u-boot-spl.bin spl/boot.bin > > Signed-off-by: Michal Simek <michal.si...@xilinx.com> > --- > > Changes in v2: > - Change commit message - reported by sjg > - Extend help in Kconfig - reported by sjg > > arch/arm/cpu/armv8/zynqmp/Kconfig | 8 ++++ > scripts/Makefile.spl | 3 +- > tools/zynqmpimage.c | 99 > ++++++++++++++++++++++++++++++++++++++- > 3 files changed, 108 insertions(+), 2 deletions(-) >
Reviewed-by: Simon Glass <s...@chromium.org> _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot