>From 3aa4b510a95b5313dc103c286eea44a6054b67d4 Mon Sep 17 00:00:00 2001
From: Syed Mohammed Khasim <kha...@ti.com>
Date: Tue, 5 Jan 2010 20:52:36 +0530
Subject: [PATCH] Enable I2C bus switching

OMAP3 supports Multiple I2C channels, this patch allows
us to use i2c dev <bus no> command to switch between busses.

Signed-off-by: Syed Mohammed Khasim <kha...@ti.com>
---
 drivers/i2c/omap24xx_i2c.c     |    5 +++++
 include/configs/omap3_beagle.h |    4 ++++
 2 files changed, 9 insertions(+), 0 deletions(-)

diff --git a/drivers/i2c/omap24xx_i2c.c b/drivers/i2c/omap24xx_i2c.c
index ff18991..a9250be 100644
--- a/drivers/i2c/omap24xx_i2c.c
+++ b/drivers/i2c/omap24xx_i2c.c
@@ -435,3 +435,8 @@ int i2c_set_bus_num(unsigned int bus)

        return 0;
 }
+
+int i2c_get_bus_num(void)
+{
+       return ((int) current_bus);
+}
diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
index d1c9cd0..fa26b35 100644
--- a/include/configs/omap3_beagle.h
+++ b/include/configs/omap3_beagle.h
@@ -100,6 +100,10 @@
 /* DDR - I use Micron DDR */
 #define CONFIG_OMAP3_MICRON_DDR                1

+/* Enable Multi Bus support for I2C */
+#define CONFIG_I2C_MULTI_BUS           1
+#define CONFIG_SYS_I2C_NOPROBES                {0x0,0x0}
+
 /* commands to include */
 #include <config_cmd_default.h>

-- 
1.5.6.3
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to