Hi,
I'm having a strange issue while porting the DART-MX6 and it's carrier board to
mainline U-Boot.
Everything works as expected except "fatls" where I get the following output :
=> fatls mmc 0:1
CACHE: Misaligned operation at range [4f59dfc8, 4f59e7c8]
CACHE: Misaligned operation at range [4f59dfc8, 4f59e7c8]
ERROR: v7_outer_cache_inval_range - start address is not aligned - 0x4f59dfc8
ERROR: v7_outer_cache_inval_range - stop address is not aligned - 0x4f59e7c8
CACHE: Misaligned operation at range [4f59dfc8, 4f59e7c8]
CACHE: Misaligned operation at range [4f59dfc8, 4f59e7c8]
ERROR: v7_outer_cache_inval_range - start address is not aligned - 0x4f59dfc8
ERROR: v7_outer_cache_inval_range - stop address is not aligned - 0x4f59e7c8
0 file(s), 0 dir(s)
But :
=> fatinfo mmc 0:1
Interface: MMC
Device 0: Vendor: Man 000074 Snr 62aee901 Rev: 4.2 Prod: USD
Type: Removable Hard Disk
Capacity: 7695.0 MB = 7.5 GB (15759360 x 512)
Filesystem: FAT16 "boot "
And it contains :
41541 imx6q-var-dt6customboard.dtb
6535440 uImage
And even fatload works :
=> fatload mmc 0:1 $loadaddr uIMage
reading uIMage
6535440 bytes read in 322 ms (19.4 MiB/s)
Same for mmc0 (SDCard) and mmc1 (eMMC).
I tested against v2017.11 and master (16fa2eb95172e63820ee5f3d4052f3362a6de84e)
with :
gcc-linaro-4.9.4-2017.01-x86_64_arm-eabi
gcc-linaro-7.1.1-2017.08-x86_64_arm-linux-gnueabihf
same behaviour.
And same behaviour when reverting the following :
af609e3 fs/fat: Check malloc return values and fix memory leaks
09fa964 fs/fat: Fix 'CACHE: Misaligned operation at range' warnings
8df8731 fs/fat: Fix pathnames using '..' that lead to the root directory
2460098 fs/fat: Reduce stack usage
Do someone have an idea except disabling data cache ?
Thanks,
Neil
--
Neil Armstrong
Embedded Linux Software Engineer
BayLibre - At the Heart of Embedded Linux
www.baylibre.com
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
