On 22/11/2017 14:15, Fabio Estevam wrote:
> From: Fabio Estevam <fabio.este...@nxp.com>
>
> mx6sxsabresd can run different kernel versions, such as NXP 4.1 or mainline.
>
> Currently the rootfs location is passed via mmcblk number and the
> problem with this approach is that the mmcblk number for the SD
> card changes depending on the kernel version.
>
> In order to avoid such issue, use the UUID method to specify the
> rootfs location.
>
> Signed-off-by: Fabio Estevam <fabio.este...@nxp.com>
> ---
> configs/mx6sxsabresd_defconfig | 1 +
> include/configs/mx6sxsabresd.h | 5 +++--
> 2 files changed, 4 insertions(+), 2 deletions(-)
>
> diff --git a/configs/mx6sxsabresd_defconfig b/configs/mx6sxsabresd_defconfig
> index ac36a18..b707322 100644
> --- a/configs/mx6sxsabresd_defconfig
> +++ b/configs/mx6sxsabresd_defconfig
> @@ -12,6 +12,7 @@ CONFIG_CMD_BOOTZ=y
> CONFIG_CMD_GPIO=y
> CONFIG_CMD_I2C=y
> CONFIG_CMD_MMC=y
> +CONFIG_CMD_PART=y
> CONFIG_CMD_PCI=y
> CONFIG_CMD_USB=y
> # CONFIG_CMD_SETEXPR is not set
> diff --git a/include/configs/mx6sxsabresd.h b/include/configs/mx6sxsabresd.h
> index 85b8601..906e677 100644
> --- a/include/configs/mx6sxsabresd.h
> +++ b/include/configs/mx6sxsabresd.h
> @@ -58,9 +58,9 @@
>
> "videomode=video=ctfb:x:800,y:480,depth:24,pclk:29850,le:89,ri:164,up:23,lo:10,hs:10,vs:10,sync:0,vmode:0\0"
> \
> "mmcdev=2\0" \
> "mmcpart=1\0" \
> - "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
> + "finduuid=part uuid mmc 2:2 uuid\0" \
> "mmcargs=setenv bootargs console=${console},${baudrate} " \
> - "root=${mmcroot}\0" \
> + "root=PARTUUID=${uuid} rootwait rw\0" \
> "loadbootscript=" \
> "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
> "bootscript=echo Running bootscript from mmc ...; " \
> @@ -68,6 +68,7 @@
> "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
> "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
> "mmcboot=echo Booting from mmc ...; " \
> + "run finduuid; " \
> "run mmcargs; " \
> "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
> "if run loadfdt; then " \
>
Reviewed-by: Stefano Babic <sba...@denx.de>
Best regards,
Stefano
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de
=====================================================================
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
