On 11/22/2017 12:13 AM, Jean-Jacques Hiblot wrote: > This series applies on top of "[PATCH v2 00/26] mmc: Add support for HS200 > and UHS modes" > > It fixes a bug with old SD and MMC cards that support only the legacy mode. > It also addresses the comments made on the mailing list: > * dump card and host capabilities in debug mode > * use 1-bit if the DTS property 'bus-width' is not present. > * recognize the "mmc-ddr-1_2v" and "mmc-hs200-1_2v" DTS properties > > Tested on DRA7, DRA72 and AM335x
Thanks for sending patches. After testing with my boards, will update. For your patches, i made the testing-uhs-supporting branch on u-boot-mmc. At least, i will share the result about testing with my boards. Best Regards, Jaehoon Chung > > Jean-Jacques Hiblot (5): > dm: mmc: updated mmc_of_parse() to not fail because of an invalid > bus-width > mmc: dm: support "mmc-ddr-1_2v" and "mmc-hs200-1_2v" boolean > properties > mmc: dump card and host capabilities if debug is enabled > mmc: Fixed a problem with old sd or mmc that do not support High speed > mmc: all hosts support 1-bit bus width and legacy timings > > drivers/mmc/mmc-uclass.c | 11 ++++++++--- > drivers/mmc/mmc.c | 24 +++++++++++++++++++----- > 2 files changed, 27 insertions(+), 8 deletions(-) > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
