U-Boot is generally flashed to a MIPS Boston development board by means of a .mcs file which Xilinx Vivado software can write to the flash present on the board. As such we'd generally want to produce an mcs file when building U-Boot to target the Boston board. Introduce a make target for u-boot.mcs which generates it using the srec_cat tool available from the SRecord project, and build it by default when srec_cat is present.
Signed-off-by: Paul Burton <paul.bur...@mips.com> Cc: Daniel Schwierzeck <daniel.schwierz...@gmail.com> Cc: u-boot@lists.denx.de --- Changes in v2: - Use try-run as suggested by Daniel. board/imgtec/boston/config.mk | 14 ++++++++++++++ 1 file changed, 14 insertions(+) create mode 100644 board/imgtec/boston/config.mk diff --git a/board/imgtec/boston/config.mk b/board/imgtec/boston/config.mk new file mode 100644 index 0000000000..2775727744 --- /dev/null +++ b/board/imgtec/boston/config.mk @@ -0,0 +1,14 @@ +# +# SPDX-License-Identifier: GPL-2.0+ +# + +quiet_cmd_srec_cat = SRECCAT $@ + cmd_srec_cat = srec_cat -output $@ -$2 $< -binary -offset $3 + +u-boot.mcs: u-boot.bin + $(call cmd,srec_cat,intel,0x7c00000) + +# if srec_cat is present build u-boot.mcs by default +has_srec_cat = $(call try-run,srec_cat -VERSion,y,n) +ALL-$(has_srec_cat) += u-boot.mcs +CLEAN_FILES += u-boot.mcs -- 2.15.0 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
