> Need to set gmac m1 pins iomux, gmac m0 tx pins, select bit2 > and bit10 at com iomux register. After that, set rgmii m1 tx > pins to 12ma drive-strength, and clean others to 2ma. > > Signed-off-by: David Wu <david...@rock-chips.com> > --- > > Changes in v2: > - New patch > > drivers/pinctrl/rockchip/pinctrl_rk3328.c | 236 > ++++++++++++++++++++++++++++++ > 1 file changed, 236 insertions(+) >
Acked-by: Philipp Tomsich <philipp.toms...@theobroma-systems.com> _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
