On 09/11/2017 15:57, vnktux wrote: > Hi guys, > > For my graduation project I need to port Broadwell-DE in u-boot, and use it > as bare-metal bootloader on our platform. > Our platform currently run Coreboot + U-Boot but of course they want to get > rid of the first one. The final 16Mb rom file is created using a tool from > Intel that basically combine descriptor + Intel ME, and on the address > 0x00800000 the 8Mb BIOS region . > So my u-boot should contain the FSP firmware and vga blob. I started porting > some files from the coreboot sourcode (src/soc/intel/fsp_broadwell_de), but > my board doesn't boot. > I am quite stuck right now and I don't know what to do anymore, specially > because there are some addressed that I don't know what to get, and also the > fsp_conf.c specifications. > Can any of you guys please do the review of what I have done so far? Nobody > in my company has knowledge with x86 platforms and if I don't get feedback I > can't continue working on it. The repository is public and available on this > link:https://git.drk.sc/WarOfDevil/u-boot.x86_64-broadwell-de
You should apply U-Boot rules. Generate your patches with git-format, or better, using Simon's patman tool, and post the series to this ML. > My custom code has been added in the following files/directory: > - config/poseidon_defconfig > - board/prodrive/poseidon > - arch/cpu/broadwell-de > - arch/include/asm/arch-broadwell-de > - arch/x86/dts/poseidon.dts > -arch/x86/dts/microcode/broadwell_de_microcode > > Thanks a lot! > Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
