From: Tien Fong Chee <tien.fong.c...@intel.com>
SPL configures DDR by programming peripheral raw binary file
and calibrating DDR.
Signed-off-by: Tien Fong Chee <tien.fong.c...@intel.com>
---
arch/arm/mach-socfpga/spl.c | 48 +++++++++++++++++++++++++++++++++++++++
configs/socfpga_arria10_defconfig | 15 +++++++++---
2 files changed, 60 insertions(+), 3 deletions(-)
diff --git a/arch/arm/mach-socfpga/spl.c b/arch/arm/mach-socfpga/spl.c
index aba116d..4529b12 100644
--- a/arch/arm/mach-socfpga/spl.c
+++ b/arch/arm/mach-socfpga/spl.c
@@ -15,6 +15,7 @@
#include <asm/arch/system_manager.h>
#include <asm/arch/freeze_controller.h>
#include <asm/arch/clock_manager.h>
+#include <asm/arch/fpga_manager.h>
#include <asm/arch/misc.h>
#include <asm/arch/scan_manager.h>
#include <asm/arch/sdram.h>
@@ -22,6 +23,10 @@
#include <asm/arch/nic301.h>
#include <asm/sections.h>
#include <fdtdec.h>
+#include <fat.h>
+#include <fs.h>
+#include <linux/ctype.h>
+#include <mmc.h>
#include <watchdog.h>
#if defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
#include <asm/arch/pinmux.h>
@@ -29,6 +34,9 @@
DECLARE_GLOBAL_DATA_PTR;
+#define BSIZE 4096
+#define PERIPH_RBF 0
+
#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
static struct pl310_regs *const pl310 =
(struct pl310_regs *)CONFIG_SYS_PL310_BASE;
@@ -197,6 +205,12 @@ void board_init_f(ulong dummy)
#elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
void spl_board_init(void)
{
+ int rval = 0;
+ int len = 0;
+ u32 buffer[BSIZE] __aligned(ARCH_DMA_MINALIGN);
+ struct spl_boot_device bootdev;
+ fpga_fs_info fpga_fsinfo;
+
/* configuring the clock based on handoff */
cm_basic_init(gd->fdt_blob);
WATCHDOG_RESET();
@@ -214,6 +228,40 @@ void spl_board_init(void)
/* Add device descriptor to FPGA device table */
socfpga_fpga_add();
+
+ bootdev.boot_device = spl_boot_device();
+
+ if (BOOT_DEVICE_MMC1 == bootdev.boot_device) {
+ struct mmc *mmc = NULL;
+ int err = 0;
+
+ spl_mmc_find_device(&mmc, bootdev.boot_device);
+
+ err = mmc_init(mmc);
+
+ if (err) {
+#ifdef CONFIG_SPL_LIBCOMMON_SUPPORT
+ error("spl: mmc init failed with error: %d\n", err);
+#endif
+ return;
+ }
+
+ fpga_fsinfo.interface = "mmc";
+ fpga_fsinfo.fstype = FS_TYPE_FAT;
+ }
+
+ fpga_fsinfo.filename = (char *)get_cff_filename(gd->fdt_blob,
+ &len,
+ PERIPH_RBF);
+
+ /* Program peripheral RBF */
+ rval = fpga_fsload(0, buffer, BSIZE, &fpga_fsinfo);
+
+ if (!rval) {
+ config_pins(gd->fdt_blob, "shared");
+
+ ddr_calibration_sequence();
+ }
}
void board_init_f(ulong dummy)
diff --git a/configs/socfpga_arria10_defconfig
b/configs/socfpga_arria10_defconfig
index 2db34b5..14adbd8 100644
--- a/configs/socfpga_arria10_defconfig
+++ b/configs/socfpga_arria10_defconfig
@@ -8,29 +8,38 @@ CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyS0,115200"
CONFIG_DEFAULT_FDT_FILE="socfpga_arria10_socdk_sdmmc.dtb"
CONFIG_FIT=y
+CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_FIT=y
CONFIG_SPL=y
CONFIG_SPL_FPGA_SUPPORT=y
+CONFIG_SPL_FAT_SUPPORT=y
+CONFIG_FS_FAT_MAX_CLUSTSIZE=32768
CONFIG_CMD_BOOTZ=y
# CONFIG_CMD_IMLS is not set
CONFIG_CMD_ASKENV=y
CONFIG_CMD_GREPENV=y
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_GPIO=y
+CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_CMD_MMC=y
CONFIG_CMD_DHCP=y
CONFIG_CMD_PING=y
CONFIG_CMD_CACHE=y
-CONFIG_CMD_EXT4=y
-CONFIG_CMD_EXT4_WRITE=y
CONFIG_DOS_PARTITION=y
-# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_ENV_IS_IN_MMC=y
+CONFIG_SPL_DOS_PARTITION=y
+CONFIG_SPL_FS_GENERIC=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
CONFIG_SPL_DM=y
CONFIG_SPL_DM_SEQ_ALIAS=y
+CONFIG_DFU_MMC=y
CONFIG_FPGA_SOCFPGA=y
CONFIG_DM_GPIO=y
CONFIG_DWAPB_GPIO=y
CONFIG_DM_MMC=y
+CONFIG_MMC_DW=y
CONFIG_SYS_NS16550=y
CONFIG_USE_TINY_PRINTF=y
+CONFIG_CMD_FPGA_LOADFS=y
+CONFIG_SPL_MMC_SUPPORT=y
--
2.2.0
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
