Hi Tom, Stefan, On 31/10/2017 03:47, Tom Rini wrote: > On Mon, Oct 30, 2017 at 09:59:04AM +0100, Stefan Agner wrote: >> Hi Tom, Stefano, >> >> Any chance to get this still into 2017.11? It allows to use 2017.11 on >> my board... > > Stefano, this is your call, thanks!
I looking into the list to pick up all remaining patches - this go in ! Regards, Stefano > >> >> -- >> Stefan >> >> On 2017-10-17 13:59, Stefan Agner wrote: >>> From: Stefan Agner <stefan.ag...@toradex.com> >>> >>> On Vybrid SoCs U-Boot gets loaded into GFX SRAM which is 512KiB. >>> Currently 32KiB is reserved for the IMX header. However, this is >>> not reflected in the size limit. In v2017.11-rc2 the actual size >>> limit (512KiB-32KiB) has been reached for Colibri VF61, which >>> lead to a successful build of U-Boot but not a working binary. >>> >>> The IMX header is much smaller than 32KiB, typically around 1KiB. >>> Decrease the reserved size to 4KiB and specify the correct U-Boot >>> size limit. Apply this new base address and limit for all Vybrid >>> based boards. >>> >>> Signed-off-by: Stefan Agner <stefan.ag...@toradex.com> >>> --- >>> >>> include/configs/colibri_vf.h | 4 ++-- >>> include/configs/pcm052.h | 4 ++-- >>> include/configs/vf610twr.h | 4 ++-- >>> 3 files changed, 6 insertions(+), 6 deletions(-) >>> >>> diff --git a/include/configs/colibri_vf.h b/include/configs/colibri_vf.h >>> index 8166aa4afb..bf3bbffe24 100644 >>> --- a/include/configs/colibri_vf.h >>> +++ b/include/configs/colibri_vf.h >>> @@ -75,8 +75,8 @@ >>> #define CONFIG_FDTADDR 0x84000000 >>> >>> /* We boot from the gfxRAM area of the OCRAM. */ >>> -#define CONFIG_SYS_TEXT_BASE 0x3f408000 >>> -#define CONFIG_BOARD_SIZE_LIMIT 524288 >>> +#define CONFIG_SYS_TEXT_BASE 0x3f401000 >>> +#define CONFIG_BOARD_SIZE_LIMIT 520192 >>> >>> #define SD_BOOTCMD \ >>> "sdargs=root=/dev/mmcblk0p2 rw rootwait\0" \ >>> diff --git a/include/configs/pcm052.h b/include/configs/pcm052.h >>> index 8144a83db2..060928bd30 100644 >>> --- a/include/configs/pcm052.h >>> +++ b/include/configs/pcm052.h >>> @@ -89,8 +89,8 @@ >>> #define CONFIG_LOADADDR 0x82000000 >>> >>> /* We boot from the gfxRAM area of the OCRAM. */ >>> -#define CONFIG_SYS_TEXT_BASE 0x3f408000 >>> -#define CONFIG_BOARD_SIZE_LIMIT 524288 >>> +#define CONFIG_SYS_TEXT_BASE 0x3f401000 >>> +#define CONFIG_BOARD_SIZE_LIMIT 520192 >>> >>> /* if no target-specific extra environment settings were defined by the >>> target, define an empty one */ >>> diff --git a/include/configs/vf610twr.h b/include/configs/vf610twr.h >>> index 3430f27c40..ddfcd6f618 100644 >>> --- a/include/configs/vf610twr.h >>> +++ b/include/configs/vf610twr.h >>> @@ -79,8 +79,8 @@ >>> #define CONFIG_SYS_LOAD_ADDR 0x82000000 >>> >>> /* We boot from the gfxRAM area of the OCRAM. */ >>> -#define CONFIG_SYS_TEXT_BASE 0x3f408000 >>> -#define CONFIG_BOARD_SIZE_LIMIT 524288 >>> +#define CONFIG_SYS_TEXT_BASE 0x3f401000 >>> +#define CONFIG_BOARD_SIZE_LIMIT 520192 >>> >>> /* >>> * We do have 128MB of memory on the Vybrid Tower board. Leave the last >> _______________________________________________ >> U-Boot mailing list >> U-Boot@lists.denx.de >> https://lists.denx.de/listinfo/u-boot > -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
