From: Patrice Chotard <patrice.chot...@st.com>
Currently this driver is used by VEXPRESS platform which doesn't support
Driver Model.
ARM_PL180_MMCI IP is embedded on STM32F4 and F7 platforms. In order to add
SD support on these 2 STM32 family SoCs, the following reworks are needed:
_ update arm_pl180_mmci_init() prototype to make this driver working
with
DM and none DM platforms
_ addapt driver to driver model
_ add bus_width device tree support
_ add clock support
_ add .get_cd callback support
This series has been tested internally on both STM32F4 and STM32F7 SoCs
family. Future SD support for these 2 platforms will be added soon.
Patrice Chotard (5):
mmc: arm_pl180_mmci: update arm_pl180_mmci_init() prototype
mmc: arm_pl180_mmci: adapt driver to DM usage
mmc: arm_pl180_mmci: add bus_width DT property support
mmc: arm_pl180_mmci: add clock support
mmc: arm_pl180_mmci: add .getcd callback
board/armltd/vexpress/vexpress_common.c | 3 +-
drivers/mmc/Kconfig | 9 ++
drivers/mmc/arm_pl180_mmci.c | 184 +++++++++++++++++++++++++++++---
drivers/mmc/arm_pl180_mmci.h | 9 +-
4 files changed, 186 insertions(+), 19 deletions(-)
--
1.9.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
