Add a new callback function *send_init_stream* which start a sequence of
at least 74 clock cycles.
The mmc core uses *mmc_send_init_stream* in order to invoke the callback
function. This will be used during power cycle where the specification
requires such a sequence after power up.

Signed-off-by: Jean-Jacques Hiblot <jjhib...@ti.com>
---
 drivers/mmc/mmc-uclass.c | 13 +++++++++++++
 drivers/mmc/mmc.c        |  6 ++++++
 include/mmc.h            | 10 ++++++++++
 3 files changed, 29 insertions(+)

diff --git a/drivers/mmc/mmc-uclass.c b/drivers/mmc/mmc-uclass.c
index 5dda20c..9c6a8ba 100644
--- a/drivers/mmc/mmc-uclass.c
+++ b/drivers/mmc/mmc-uclass.c
@@ -51,6 +51,19 @@ int mmc_set_ios(struct mmc *mmc)
        return dm_mmc_set_ios(mmc->dev);
 }
 
+void dm_mmc_send_init_stream(struct udevice *dev)
+{
+       struct dm_mmc_ops *ops = mmc_get_ops(dev);
+
+       if (ops->send_init_stream)
+               ops->send_init_stream(dev);
+}
+
+void mmc_send_init_stream(struct mmc *mmc)
+{
+       dm_mmc_send_init_stream(mmc->dev);
+}
+
 int dm_mmc_get_wp(struct udevice *dev)
 {
        struct dm_mmc_ops *ops = mmc_get_ops(dev);
diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
index 46ec5e1..fd93691 100644
--- a/drivers/mmc/mmc.c
+++ b/drivers/mmc/mmc.c
@@ -1198,6 +1198,10 @@ static inline int bus_width(uint cap)
 }
 
 #if !CONFIG_IS_ENABLED(DM_MMC)
+static void mmc_send_init_stream(struct mmc *mmc)
+{
+}
+
 static int mmc_set_ios(struct mmc *mmc)
 {
        int ret = 0;
@@ -1983,6 +1987,8 @@ int mmc_start_init(struct mmc *mmc)
        mmc_set_bus_width(mmc, 1);
        mmc_set_clock(mmc, 1);
 
+       mmc_send_init_stream(mmc);
+
        /* Reset the Card */
        err = mmc_go_idle(mmc);
 
diff --git a/include/mmc.h b/include/mmc.h
index e524963..bd096ae 100644
--- a/include/mmc.h
+++ b/include/mmc.h
@@ -361,6 +361,14 @@ struct dm_mmc_ops {
        int (*set_ios)(struct udevice *dev);
 
        /**
+        * send_init_stream() - send the initialization stream: 74 clock cycles
+        * This is used after power up before sending the first command
+        *
+        * @dev:        Device to update
+        */
+       void (*send_init_stream)(struct udevice *dev);
+
+       /**
         * get_cd() - See whether a card is present
         *
         * @dev:        Device to check
@@ -382,11 +390,13 @@ struct dm_mmc_ops {
 int dm_mmc_send_cmd(struct udevice *dev, struct mmc_cmd *cmd,
                    struct mmc_data *data);
 int dm_mmc_set_ios(struct udevice *dev);
+void dm_mmc_send_init_stream(struct udevice *dev);
 int dm_mmc_get_cd(struct udevice *dev);
 int dm_mmc_get_wp(struct udevice *dev);
 
 /* Transition functions for compatibility */
 int mmc_set_ios(struct mmc *mmc);
+void mmc_send_init_stream(struct mmc *mmc);
 int mmc_getcd(struct mmc *mmc);
 int mmc_getwp(struct mmc *mmc);
 
-- 
1.9.1

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot

Reply via email to