Hi On Wed, 2017-09-20 at 15:04 +0200, Stefano Babic wrote: > Hi Fabio, Anatolji, > > just to save time : this is the list of boards that are affected by this > problem. > > cgtqmx6eval > wandboard
> colibri_imx6 > apalis_imx6 I will prepare a patch for these two. Max > mx6cuboxi > mx6sabresd > imx6qdl_icore_rqs > > A good solution is also if the board maintainers (I CCed all of them) > could fix this and I will apply afterwards Anatolji's patch. > > Best regards, > Stefano > > On 20/09/2017 13:22, Anatolij Gustschin wrote: > > > > Hi Fabio, > > > > On Wed, 20 Sep 2017 00:18:52 -0300 > > Fabio Estevam feste...@gmail.com wrote: > > > > > > > > Hi Stefano, > > > > > > On Tue, Sep 19, 2017 at 4:54 AM, Stefano Babic <sba...@denx.de> wrote: > > > > > > > > > > > Reason is clear: boards have in SPL a setup_display() that calls > > > > enable_ipu_clock. But it makes no sense to have IPU support in SPL. > > > > > > Good catch, thanks! > > > > > > Anatolij, > > > > > > Do you plan to remove IPU code from SPL? > > > > I think we can do it by > > > > diff --git a/include/configs/wandboard.h b/include/configs/wandboard.h > > index 3ba4c29..b0f317b 100644 > > --- a/include/configs/wandboard.h > > +++ b/include/configs/wandboard.h > > @@ -63,6 +63,7 @@ > > #define CONFIG_PHY_ATHEROS > > > > /* Framebuffer */ > > +#if !defined(CONFIG_SPL_BUILD) > > #ifdef CONFIG_VIDEO > > #define CONFIG_VIDEO_IPUV3 > > #define CONFIG_VIDEO_BMP_RLE8 > > @@ -74,6 +75,7 @@ > > #define CONFIG_IMX_HDMI > > #define CONFIG_IMX_VIDEO_SKIP > > #endif > > +#endif > > > > #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG > > #define CONFIG_EXTRA_ENV_SETTINGS \ > > > > I'll try to prepare a patch for other board configs later this week. > > > > Thanks, > > > > Anatolij > > > > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
