On Thu, Dec 10, 2009 at 03:14:36PM +0000, Nick Thompson wrote: > Davinci: NAND enable ECC even when not in NAND boot mode > > On Davinci platforms, the default NAND device is enabled (for ECC) > in low level boot code when NAND boot mode is used. If booting in > another mode, NAND ECC is not enabled. The driver should make > sure ECC is enabled regardless of boot mode if NAND is configured > in U-Boot. > > Signed-off-by: Nick Thompson <nick.thomp...@ge.com> > --- > Applies to: u-boot-ti > > This patch depends on "[PATCH v2] Davinci: Configurable NAND chip selects" > posted on Nov 19, 2009. > > drivers/mtd/nand/davinci_nand.c | 2 ++ > include/asm-arm/arch-davinci/emif_defs.h | 3 +-- > 2 files changed, 3 insertions(+), 2 deletions(-)
Acked-by: Scott Wood <scottw...@freescale.com> -Scott _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
