Update defconfig to enable falcon boot, add needed macros to board
header file. Because environment variables are not avaiable during
SPL stage for SD boot, set "boot_os=y" as default.
Signed-off-by: York Sun <york....@nxp.com>
---
Changes in v2: None
configs/ls1043ardb_sdcard_defconfig | 6 ++++++
include/configs/ls1043a_common.h | 7 ++++---
include/configs/ls1043ardb.h | 5 +++++
3 files changed, 15 insertions(+), 3 deletions(-)
diff --git a/configs/ls1043ardb_sdcard_defconfig
b/configs/ls1043ardb_sdcard_defconfig
index 2ce2aba..37b3257 100644
--- a/configs/ls1043ardb_sdcard_defconfig
+++ b/configs/ls1043ardb_sdcard_defconfig
@@ -25,6 +25,7 @@ CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
CONFIG_CMD_GPT=y
CONFIG_CMD_I2C=y
+# CONFIG_CMD_IMLS is not set
CONFIG_CMD_MMC=y
CONFIG_CMD_NAND=y
CONFIG_CMD_SF=y
@@ -52,3 +53,8 @@ CONFIG_DM_USB=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_USB_STORAGE=y
+CONFIG_SPL_OS_BOOT=y
+CONFIG_SPL_LOAD_FIT=y
+CONFIG_SPL_OF_LIBFDT=y
+CONFIG_SPL_FIT=y
+CONFIG_SPL_GZIP=y
diff --git a/include/configs/ls1043a_common.h b/include/configs/ls1043a_common.h
index 002830c..734729a 100644
--- a/include/configs/ls1043a_common.h
+++ b/include/configs/ls1043a_common.h
@@ -73,10 +73,10 @@
#define CONFIG_SPL_STACK 0x1001e000
#define CONFIG_SPL_PAD_TO 0x1d000
-#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_TEXT_BASE + \
- CONFIG_SYS_MONITOR_LEN)
+#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_BSS_START_ADDR + \
+ CONFIG_SPL_BSS_MAX_SIZE)
#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000
-#define CONFIG_SPL_BSS_START_ADDR 0x80100000
+#define CONFIG_SPL_BSS_START_ADDR 0x8f000000
#define CONFIG_SPL_BSS_MAX_SIZE 0x80000
#ifdef CONFIG_SECURE_BOOT
@@ -280,6 +280,7 @@
"load_addr=0xa0000000\0" \
"kernel_size=0x2800000\0" \
"console=ttyS0,115200\0" \
+ "boot_os=y\0" \
"mtdparts=" MTDPARTS_DEFAULT "\0" \
BOOTENV \
"boot_scripts=ls1043ardb_boot.scr\0" \
diff --git a/include/configs/ls1043ardb.h b/include/configs/ls1043ardb.h
index da87497..f9843f5 100644
--- a/include/configs/ls1043ardb.h
+++ b/include/configs/ls1043ardb.h
@@ -46,6 +46,11 @@
#ifdef CONFIG_SD_BOOT
#define CONFIG_SYS_FSL_PBL_RCW board/freescale/ls1043ardb/ls1043ardb_rcw_sd.cfg
+#define CONFIG_CMD_SPL
+#define CONFIG_SYS_SPL_ARGS_ADDR 0x90000000
+#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x10000
+#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x500
+#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS 30
#endif
/*
--
2.7.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
