This commit updates the .its file for the RK3399-Q7 to use the new
features and demonstrates how to use those:
 * it marks the ATF as the 'firmware'
 * it tracks the OS-type for U-Boot and ATF
 * it loads the PMU (M0) firmware to DRAM and records the location
   to /fit-images (where our ATF reads it from)

With the handoff of the next-stage FDT to ATF in place, we can now use
this to pass information about the load addresses and names of each
loadables to ATF: now we can load the M0 firmware into DRAM and avoid
overwriting parts of the SPL stage.  This is achieved by changing our
.its-file to use an available area of DRAM as the load-address.

Signed-off-by: Philipp Tomsich <philipp.toms...@theobroma-systems.com>
---

 board/theobroma-systems/puma_rk3399/fit_spl_atf.its | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/board/theobroma-systems/puma_rk3399/fit_spl_atf.its 
b/board/theobroma-systems/puma_rk3399/fit_spl_atf.its
index 520f846..cb7d92f 100644
--- a/board/theobroma-systems/puma_rk3399/fit_spl_atf.its
+++ b/board/theobroma-systems/puma_rk3399/fit_spl_atf.its
@@ -17,6 +17,7 @@
                        description = "U-Boot (64-bit)";
                        data = /incbin/("../../../u-boot-nodtb.bin");
                        type = "standalone";
+                       os = "U-Boot";
                        arch = "arm64";
                        compression = "none";
                        load = <0x00200000>;
@@ -26,16 +27,17 @@
                        data = /incbin/("../../../bl31-rk3399.bin");
                        type = "firmware";
                        arch = "arm64";
+                       os = "arm-trusted-firmware";
                        compression = "none";
-                       load = <0x00001000>;
-                       entry = <0x00001000>;
+                       load = <0x1000>;
+                       entry = <0x1000>;
                };
                pmu {
                        description = "Cortex-M0 firmware";
                        data = /incbin/("../../../rk3399m0.bin");
                        type = "pmu-firmware";
                        compression = "none";
-                       load = <0xff8c0000>;
+                       load = <0x180000>;
                 };
                fdt {
                        description = "RK3399-Q7 (Puma) flat device-tree";
@@ -49,8 +51,8 @@
                default = "conf";
                conf {
                        description = "Theobroma Systems RK3399-Q7 (Puma) SoM";
-                       firmware = "uboot";
-                       loadables = "atf";
+                       firmware = "atf";
+                       loadables = "uboot", "pmu";
                        fdt = "fdt";
                };
        };
-- 
2.1.4

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot

Reply via email to