> I'm having problems building fw_printenv. I'm sure it's simple but > I'm just not getting it. > > I'm working with u-boot 2009.01-rc1. I have the environment variable > CROSS_COMPILE set, and then execute "make env" from the top of the > u-boot source tree. Capture is below. I don't had "stdint.h" > anywhere in my environment. Any ideas what I have wrong? > > Thanks, > twebb > > > j...@jb:u-boot-arm$ > j...@jb:u-boot-arm$ echo $CROSS_COMPILE > arm-eabi- > j...@jb:u-boot-arm$ > j...@jb:u-boot-arm$ make env > make -C tools/env all MTD_VERSION= || exit 1 > make[1]: Entering directory `/home/jb/work-1130/boot/u-boot-arm/tools/env' > arm-eabi-gcc -Wall -DUSE_HOSTCC > -I/home/jb/work-1130/boot/u-boot-arm/include crc32.c fw_env.c > fw_env_main.c -o fw_printenv > crc32.c:14:20: error: stdint.h: No such file or directory > crc32.c:81: error: expected '=', ',', ';', 'asm' or '__attribute__' > before 'crc_table' > crc32.c:157: error: expected '=', ',', ';', 'asm' or '__attribute__' > before 'crc32' > crc32.c:206: error: expected '=', ',', ';', 'asm' or '__attribute__' > before 'crc32_wd' > fw_env.c:27:19: error: errno.h: No such file or directory > fw_env.c:28:19: error: fcntl.h: No such file or directory > ... >
Does anyone have any ideas on this? I'm still stuck. Though I feel certain it's some sort of environment problem, I can't figure it out. Any suggestions would be appreciated. twebb _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
