Hi Eric, Stefan, On 13/09/2017 02:30, Eric Nelson wrote: > Hi Stefan, > > I hate to be fussy about this, but I don't think I saw a reply > to my earlier comment about the term "USB PHY". > > https://lists.denx.de/pipermail/u-boot/2017-September/305123.html > > Since i.MX6 SoCs have USB **Host** Phy's as well as the USB OTG Phy, > this patch is a bit misleading. > > There's no reference to OTG anywhere in this or patch 2. >
To be consistent with the names, Eric is right. We have PHY0 for OTG and PHY1 for Host. If you still want to use as name is_usbphy_active, then this should take as parameter the phy number, or you switch to a "otg" name to ensure that it is only for the OTG interface. Best regards, Stefano > On 09/12/2017 04:54 PM, Stefan Agner wrote: >> From: Stefan Agner <stefan.ag...@toradex.com> >> >> This macro allows to detect whether the USB PHY is active. This >> is helpful to detect if the boot ROM has previously started the >> USB serial downloader. >> >> The idea is taken from the mfgtool support in the NXP U-Boot: >> http://git.freescale.com/git/cgit.cgi/imx/uboot-imx.git/commit/?h=imx_v2016.03_4.1.15_2.0.0_ga&id=a352ed3c5184b95c4c9f7468f5fbb5f43de5e412 >> >> >> Signed-off-by: Stefan Agner <stefan.ag...@toradex.com> >> Acked-by: Marcel Ziswiler <marcel.ziswi...@toradex.com> >> Tested-by: Fabio Estevam <fabio.este...@nxp.com> >> --- >> >> Changes in v3: None >> Changes in v2: >> - Move macro to sys_proto.h >> - Renamed from is_boot_from_usb() to is_usbphy_active() >> - Use defines for register offset and field >> - Remove tab after define >> - Remove comment since the actual "magic" is happening and >> documented at usage side >> >> arch/arm/include/asm/arch-mx6/sys_proto.h | 7 +++++++ >> 1 file changed, 7 insertions(+) >> >> diff --git a/arch/arm/include/asm/arch-mx6/sys_proto.h >> b/arch/arm/include/asm/arch-mx6/sys_proto.h >> index 14f5d948c9..9d4b1d6768 100644 >> --- a/arch/arm/include/asm/arch-mx6/sys_proto.h >> +++ b/arch/arm/include/asm/arch-mx6/sys_proto.h >> @@ -6,3 +6,10 @@ >> */ >> #include <asm/mach-imx/sys_proto.h> >> + >> +#define USBPHY_PWD 0x00000000 >> + >> +#define USBPHY_PWD_RXPWDRX (1 << 20) /* receiver block power down */ >> + >> +#define is_usbphy_active(void) (!(readl(USB_PHY0_BASE_ADDR + >> USBPHY_PWD) & \ >> + USBPHY_PWD_RXPWDRX)) >> > > Regards, > > > Eric -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot