On Wed, Sep 13, 2017 at 3:49 PM, Ashish Kumar <ashish.ku...@nxp.com> wrote:
> Signed-off-by: Ashish Kumar <ashish.ku...@nxp.com>
> Signed-off-by: Amrita Kumari <amrita.kum...@nxp.com>
> ---
>
> v1:
> Rebased to
> ba39608 ARM: DRA72x: Add support for detection of DRA71x SR 2.1
>
> arch/arm/dts/fsl-ls1088a.dtsi | 14 ++++++++++++++
> configs/ls1088ardb_qspi_defconfig | 8 ++++++++
> include/configs/ls1088ardb.h | 5 +++++
> include/linux/usb/xhci-fsl.h | 2 +-
> 4 files changed, 28 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/dts/fsl-ls1088a.dtsi b/arch/arm/dts/fsl-ls1088a.dtsi
> index d943a9e..46ac475 100644
> --- a/arch/arm/dts/fsl-ls1088a.dtsi
> +++ b/arch/arm/dts/fsl-ls1088a.dtsi
> @@ -123,4 +123,18 @@
> ranges = <0x81000000 0x0 0x00000000 0x30 0x00020000 0x0
> 0x00010000 /* downstream I/O */
> 0x82000000 0x0 0x40000000 0x30 0x40000000 0x0
> 0x40000000>; /* non-prefetchable memory */
> };
> +
> + usb0: usb3@3100000 {
> + compatible = "fsl,layerscape-dwc3";
> + reg = <0x0 0x3100000 0x0 0x10000>;
> + interrupts = <0 80 0x4>; /* Level high type */
> + dr_mode = "host";
> + };
> +
> + usb1: usb3@3110000 {
> + compatible = "fsl,layerscape-dwc3";
> + reg = <0x0 0x3110000 0x0 0x10000>;
> + interrupts = <0 81 0x4>; /* Level high type */
> + dr_mode = "host";
> + };
> };
> diff --git a/configs/ls1088ardb_qspi_defconfig
> b/configs/ls1088ardb_qspi_defconfig
> index 2d5a134..3034f50 100644
> --- a/configs/ls1088ardb_qspi_defconfig
> +++ b/configs/ls1088ardb_qspi_defconfig
> @@ -31,3 +31,11 @@ CONFIG_FSL_DSPI=y
> CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
> # CONFIG_DISPLAY_BOARDINFO is not set
> CONFIG_FSL_LS_PPA=y
> +CONFIG_USB=y
> +CONFIG_USB_GADGET=y
> +CONFIG_CMD_USB=y
> +CONFIG_DM_USB=y
> +CONFIG_USB_XHCI_HCD=y
> +CONFIG_USB_XHCI_DWC3=y
> +CONFIG_USB_DWC3=y
> +CONFIG_USB_STORAGE=y
> diff --git a/include/configs/ls1088ardb.h b/include/configs/ls1088ardb.h
> index 3223278..47ee527 100644
> --- a/include/configs/ls1088ardb.h
> +++ b/include/configs/ls1088ardb.h
> @@ -296,6 +296,11 @@
> #define CONFIG_PHY_GIGE
> #endif
>
> +/* USB */
> +#define CONFIG_HAS_FSL_XHCI_USB
> +#define CONFIG_USB_XHCI_FSL
Please convert this as a Kconfig option.
> +#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
CONFIG_USB_MAX_CONTROLLER_COUNT is not used anywhere in DM USB. Please remove.
> +
> /* MMC */
> #ifdef CONFIG_MMC
> #define CONFIG_FSL_ESDHC
> diff --git a/include/linux/usb/xhci-fsl.h b/include/linux/usb/xhci-fsl.h
> index bd54089..a916afb 100644
> --- a/include/linux/usb/xhci-fsl.h
> +++ b/include/linux/usb/xhci-fsl.h
> @@ -58,7 +58,7 @@ struct fsl_xhci {
> #define CONFIG_SYS_FSL_XHCI_USB1_ADDR CONFIG_SYS_XHCI_USB1_ADDR
> #define CONFIG_SYS_FSL_XHCI_USB2_ADDR 0
> #define CONFIG_SYS_FSL_XHCI_USB3_ADDR 0
> -#elif defined(CONFIG_ARCH_LS2080A)
> +#elif defined(CONFIG_ARCH_LS2080A) || defined(CONFIG_ARCH_LS1088A)
> #define CONFIG_SYS_FSL_XHCI_USB1_ADDR CONFIG_SYS_XHCI_USB1_ADDR
> #define CONFIG_SYS_FSL_XHCI_USB2_ADDR CONFIG_SYS_XHCI_USB2_ADDR
> #define CONFIG_SYS_FSL_XHCI_USB3_ADDR 0
> --
Regards,
Bin
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
