Can you turn on the additional debug information. That will give a better Clue as to what part is hanging.
Feng Kan AMCC Software -----Original Message----- From: u-boot-boun...@lists.denx.de [mailto:u-boot-boun...@lists.denx.de] On Behalf Of Felix Radensky Sent: Wednesday, December 09, 2009 10:02 AM To: u-boot@lists.denx.de; Stefan Roese Subject: [U-Boot] Problem with transparent PCI-PCI bridge on Canyonlands Hi, I'm running latest u-boot on 1GHz Canyonlands board and have trouble using 64-bit transparent PCI-PCI PLX 6254 bridge. With PLX evaluation board plugged into Canyonlands PCI slot u-boot hangs. With PCI support disabled u-boot works fine. The PLX board is OK, it was recognized by both u-boot and kernel on Freescale MPC8536DS board. On Canyonlands linux-2.6.32 silently resets the board when PLX is plugged in. Any ideas what could be wrong in u-boot ? I'll post a separate question to linuxppc-dev. U-Boot 2009.11-rc2-00002-g386118a (Dec 09 2009 - 18:48:44) CPU: AMCC PowerPC 460EX Rev. A at 1000 MHz (PLB=200 OPB=100 EBC=100) Security/Kasumi support Bootstrap Option H - Boot ROM Location I2C (Addr 0x52) Internal PCI arbiter enabled 32 kB I-Cache 32 kB D-Cache Board: Canyonlands - AMCC PPC460EX Evaluation Board, 2*PCIe, Rev. 14 I2C: ready DRAM: 512 MB (ECC not enabled, 400 MHz, CL3) FLASH: 64 MB NAND: 256 MiB PCI: Bus Dev VenId DevId Class Int Thanks a lot. Felix. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
