Hi Rob,
On 10 September 2017 at 05:21, Rob Clark <robdcl...@gmail.com> wrote:
> Add EFI variable support, mapping to u-boot environment variables.
> Variables are pretty important for setting up boot order, among other
> things. If the board supports saveenv, then it will be called in
> ExitBootServices() to persist variables set by the efi payload. (For
> example, fallback.efi configuring BootOrder and BootXXXX load-option
> variables.)
>
> Variables are *not* currently exposed at runtime, post ExitBootServices.
> On boards without a dedicated device for storage, which the loaded OS
> is not trying to also use, this is rather tricky. One idea, at least
> for boards that can persist RAM across reboot, is to keep a "journal"
> of modified variables in RAM, and then turn halt into a reboot into
> u-boot, plus store variables, plus halt. Whatever the solution, it
> likely involves some per-board support.
>
> Mapping between EFI variables and u-boot variables:
>
> efi_$guid_$varname = {attributes}(type)value
>
> For example:
>
> efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_OsIndicationsSupported=
> "{ro,boot,run}(blob)0000000000000000"
> efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_BootOrder=
> "(blob)00010000"
>
> The attributes are a comma separated list of these possible
> attributes:
>
> + ro - read-only
> + boot - boot-services access
> + run - runtime access
>
> NOTE: with current implementation, no variables are available after
> ExitBootServices, and all are persisted (if possible).
>
> If not specified, the attributes default to "{boot}".
>
> The required type is one of:
>
> + utf8 - raw utf8 string
> + blob - arbitrary length hex string
>
> Signed-off-by: Rob Clark <robdcl...@gmail.com>
> ---
> cmd/bootefi.c | 4 +
> include/efi.h | 19 +++
> include/efi_loader.h | 10 ++
> lib/efi_loader/Makefile | 2 +-
> lib/efi_loader/efi_boottime.c | 6 +
> lib/efi_loader/efi_runtime.c | 17 ++-
> lib/efi_loader/efi_variable.c | 335
> ++++++++++++++++++++++++++++++++++++++++++
> 7 files changed, 388 insertions(+), 5 deletions(-)
> create mode 100644 lib/efi_loader/efi_variable.c
What does hex2mem() do? Please add a comment
This code looks fine but we need a simple way to test it. I think
Herinrich is working on a single hello world test. That could be
enhanced to set and read variables.
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
